Product model | WBP-K02Z-350 |
Specification and size | 320×260×90mm |
Net weight | 3.5Kg |
Housing material | Galvanized plate |
Node capacity | RS485:50 pcs (including detector and guide split screen) Powerbus:42pcs (including detector and guide split screen) |
Corollary equipment | 24V indoor guidance screen |
Operating temperature | -30 ~ +75℃ |
Communication mode | 1route CAN 2routeRS485/ 1routepowerbus |
Communication distance | CAN:≤1000m RS485:≤300m powerbus≤130m |
Power consumption | ≤2W(Own power consumption, without detector) |
Table 3.1 Technical parameters of the indoor zone controller
The indoor zone controller is used to connect the indoor node controller and the parking detector, LED display screen, etc., using RS485, CAN bus hybrid communication mechanism, to solve the problem of unreliable long-distance communication, network node number expansion problem, group management problem.
The indoor zone controller is used to check the status of the connected detector and upload the relevant information to the indoor node controller.
1) Adopt the international advanced 32-bit ARM processor, the whole industrial design, to ensure the stability and reliability of the product;
2) Optional independent dual RS485 interface and single powerbus interface, RS485 single can be connected to a maximum of 25 devices, powerbus single can be connected to a maximum of 42 devices, the detector can be large capacity, high efficiency;
3) The equipment has short-circuit, overvoltage and overload protection functions to prevent electrical damage to related equipment due to wiring errors during construction;
4) The overall industrial design, through strict static electricity, lightning and surge, group pulse testing, effectively ensure the reliable use of equipment;
5) Support remote upgrade.
Product Installation
The indoor zone controller is usually installed on a column or wall, and is recommended to be installed at a height of 2 meters or more. The installation diagram is shown in Figure 4.1:
WBP-K02Z-350W Indoor Zone Controller Ultrasonic RS485 CAN Guidance PGS