The Temperature Cycle Tester is used to simulate the ability of the battery pack/battery system/battery module/cell sample to adapt to the environment under different temperature and humidity conditions.

The constant temperature and humidity chamber is also called high and low temperature alternatinghumidity test chamber,Which is mainly applied in materil fields to test functions like heat resistance,cold resistance,dry resistance and moisture resistance,etc.

The adopet controller with colorful touchsensitive screen can be operated easily in Chinese,English and Russian.On The screen,not only canprogram be easily edited but related date of the whole systen operation and abnormal status during theoperation of implementing and setting programme curves can be shown,Furthermore,the screen can immediately show the reason for fault automatically and provide the solutions .

Advantages
-Cold-end controlling tech
-Report metering result
-Energy saving up to 35%
-Double 85°without starting the compressor
-Quad-insulation,nofog or drop
-No frost for long-time lowtemp and humidity

IEC60068-2-1.1990 Low Temperature testing method
IEC60068-2-2.1974 High-temperature testing methods
GJB150.3 High Temperature testing method
GJB150.4 Low temperature testing method
GB11158 Technical conditions for high-temperature testing Chamber
GB10589-89 Technical conditions for Low temperature testing Chamber
GB/T2423.1-2001 Low temperature testing methods
GB/T2423.2-2001 High-temperature testing methods
GB/T2423.22-2001 Temperature testing method
GB10592-89 Technical conditions for high and low temperature testing Chamber

JIANQIAO TESTING EQUIPMENT CO.,LTD is a professional manufacturer in the mechanical teste , plastic tester , environment tester and general quality control tester area ,Our engineer was cover most of expertise as software design , machinery hydraulic , electronic .motor and R&D ,QC , PMC ,Calibration .

Our product wide use of the laboratory , quality control system and the material of silicone rubber , electronic ,metal ,power ,cable wire ,shoe ,leather , packing ,building ,petrochemical , aerial ,and so on .Our product are indispensable to material ,physical test , teaching ,quality controletc ,

All of our products are in ine with ISO ,ASTM ,AATCC ,TAPPL ,UL ,VDE ,IEC ,ANSI ,CSA , JIS BS ,EN ,DIN ,SATRA ,GB ,CNS ,and so on test standarda around the world.

-Stainless steel 304# 1.2mm interior
-Energy-efficient refrigeration with exclusive eletronic expansion valve system
-Specialized humidity generation and control
-Unique thermal break construction for extreme testing
-3" cable port with cover,two shelf & casters included
-5.5" touch screen
-Get improved performance, energy savings, plus USB or Internet access
-Multiilingual display in English and Chinese or other Language can be customized
-Alarm diagnostics and history, plus a "back trace" for troubleshooting.
-Standard USB port & Remote WLAN &APP can be customized.

Feature

1.The temperature control is PID microcomputer automatic calculation intelligent temperature control table, PV/SV display at the same time, the required temperature can be freely set according to the individual's will within the allowable range of the machine temperature, and its temperature control can be ensured by the PID parameter setting in the table.

2.Warm-in force CA (K) TYPE temperature sensor, the output is 12V.

3.The current controller adopts the imported thyristor solid state relay (SSR) without contact and no spark phenomenon, which maintains the high stability of the current and automatically adjusts the output ratio through the temperature controller signal.

4.Timer: electronic digital display, timed automatic temperature control, temperature to time, time to cut off power supplyand ,it is convenient to observe whether the temperature inside the Chamber is normal when the work is completed