1HP 2HP 3HP VFD 220V single phase input 380v three phase output inverter
   
  Product positioning
  VEIKONG VFD200A series inverter is economical inverter specially for small scale processing and
  manufacturing automation control
   
   Performance introduction
   VFD200 series inverter is a high-quality and simple VF control inverter.It can run a wide range of speed in high precision by decoupling control of motor magnetic flex current and torque current torque:fast and accurately,High end hardware platforms,scientific production technology and
  complete testing equipment make the product more stable and reliable.
   
   Technical features
   1,Using DSP as the core of control unit to achieve high-speed and high-performance control
  2,Motor parameter self-learning,intelligent setting to the optimal control model
  3,High performance IPM module,protection function such as under voltage,overcurrent,overtemperaature,over the ground short circuit etc.
  4,The unique EMC design minimizing the pollution to power.
   
   Capacity range
   Power range:0.75-11kw power range
  Frequency range:0.00-400.00HZ
  Voltage level:single phase 220V/ three phase 380V
   
   Application industry
   Medicine,food,packaging,engraving,washing and other industries Machinery equipment,a variety of small-scale machinery equipment.
   
  Product details
    
  Steady speed precision high speed range Steady speed precision:plus or minus 0.5% (open loop),plus or minus 0.02% (closed loop).
  Speed range:1:100 (open loop),1:1000 (closed loop) The torque response<40ms(open loop)
  Automatic torque increase function,the realization of V/F control mode and low frequency (1Hz)with large output torque control:110%rated stable operation,1min 150%rated load,180% rated load 3s.
   
   High speed high performance control DSP core control unit Simple PLC Parameter auto-tuning
  Low frequency high torque strong performance of vector control
       
  VFD200A technical data:
   
    	 		 			| Item |  			Specifications |  		
 		 			|  			     			    			    			    			    			    			    			    			    			    			Standard functions  			 |  			Maximum frequency |  			Vector control:0~500Hz V/F control: 0~500Hz |  		
 		 			|   |  			 			     			Carrier frequency  			 |  			0.5kHz~16kHz (The carrier frequency is automatically adjusted based on the load features.) |  		
 		 			|   |  			 			 Input frequency   			resolution  			 |  			 			 Digital setting: 0.01 Hz   			Analog setting: maximum frequency x 0.025%  			 |  		
 		 			|   |  			 			     			Control mode  			 |  			 			 Sensor-less flux vector control (SFVC)   			Closed-loop vector control (CLVC) (+PG Card) Voltage/Frequency (V/F) control  			 |  		
 		 			|   |  			Startup torque |  			0.5Hz/150%(SVC);0Hz/180%(FVC) |  		
 		 			|   |  			Speed range |  			1:100 (SVC) |  			1:1000 (FVC) |  		
 		 			|   |  			Speed stability accuracy |  			±0.5%(SVC) |  			±0.02%(FVC) |  		
 		 			|   |  			Torque control accuracy |  			±5%(FVC) |  		
 		 			|   |  			 			     			    			Overload capacity  			 |  			 			 G type: 60s for 150% of the rated current, 3s for 180% of the rated current   			P type: 60s for 120% of the rated current, 3s for 150% of   			the rated current  			 |  		
 		 			|   |  			 			     			Torque boost  			 |  			 			 Auto boost;   			Manual boost: 0.1%~30.0%  			 |  		
 	 
   
  VFD200A picture:
  


   
  Connect wire diagram:
  