AC drive 2.2kw 4kw 220V single phase input 380v three phase output inverter
| rated power kw |
0.7 |
1.5 |
2.2 |
0.7 |
1.5 |
2.2 |
4 |
5.5 |
7.5 |
11 |
15 |
18.5 |
22 |
30 | ||
| Output Current A |
5 |
7 |
11 |
2.5 |
3.7 |
5.1 |
9 |
13 |
17 |
25 |
32 |
37 |
45 |
60 | ||
| Rated Voltage V |
1ph 220V |
3ph 380V | ||||||||||||||
| Rated power kw |
37 |
45 |
55 |
75 |
90 |
110 |
132 |
160 |
185 |
200 |
220 |
250 |
280 |
315 | ||
| Output current A |
75 |
90 |
110 |
150 |
176 |
210 |
250 |
300 |
340 |
380 |
415 |
470 |
520 |
600 | ||
| Rated voltage V |
3ph 380V | |||||||||||||||
| Item | Specifications | |||||||||||||||
|
Standard functions | Maximum frequency | Vector control:0~500Hz V/F control: 0~500Hz | ||||||||||||||
|
Carrier frequency | 0.5kHz~16kHz (The carrier frequency is automatically adjusted based on the load features.) | |||||||||||||||
| Input frequency resolution | Digital setting: 0.01 Hz Analog setting: maximum frequency x 0.025% | |||||||||||||||
|
Control mode | Sensor-less flux vector control (SFVC) Closed-loop vector control (CLVC) (+PG Card) Voltage/Frequency (V/F) control | |||||||||||||||
| Startup torque | 0.5Hz/150%(SVC);0Hz/180%(FVC) | |||||||||||||||
| Speed range | 1:100 (SVC) | 1:1000 (FVC) | ||||||||||||||
| Speed stability accuracy | ±0.5%(SVC) | ±0.02%(FVC) | ||||||||||||||
| Torque control accuracy | ±5%(FVC) | |||||||||||||||
|
Overload capacity | G type: 60s for 150% of the rated current, 3s for 180% of the rated current P type: 60s for 120% of the rated current, 3s for 150% of the rated current | |||||||||||||||
|
Torque boost | Auto boost; Manual boost: 0.1%~30.0% | |||||||||||||||
VFD200A picture:



Connect wire diagram:
