UV Curing Glass-to-Glass Bonding Adhesive

3001 UV Curing Glass-to-Glass Bonding Adhesive is a light yellow transparent UV adhesive specially developed for glass-to-glass bonding such as glass cabinets and crafts. It delivers near 99% transparency with long-term anti-yellowing and anti-whitening performance, good water resistance that resists whitening and delamination during long soaking, and excellent chemical and aging resistance.

Technical Specifications

Key Features

• Near 99% transparency
• Long-term anti-yellowing and anti-whitening
• Good water resistance, no whitening or delamination during long soaking
• Excellent chemical resistance and aging resistance
• Ideal for glass-to-glass bonding
• Suitable for glass cabinets and crafts

Applications

• Glass-to-glass bonding
• Glass cabinet and glass facade bonding
• Bonding of glass crafts and decorative glass
• Bonding requiring high transparency
• Applications requiring water and aging resistance

Operation and Curing Guide

1. Surface preparation: clean the glass surfaces to remove oil, dust and contaminants for maximum transparency and adhesion.
2. Dispensing: apply the adhesive evenly to the bonding area.
3. Assembly: position and join the glass parts, removing any excess adhesive before curing.
4. UV curing: expose the adhesive to UV light at 1500 mJ/cm² until fully cured.
5. Inspection: verify a highly transparent bond with no whitening or bubbles.
6. Rework: gently separate bonded parts, clean the surfaces and re-apply the adhesive when repair is needed.

FAQ

Q1: What is the 3001 adhesive mainly used for?
3001 is a UV curing glass-to-glass bonding adhesive used for glass cabinets, crafts and glass facade bonding.

Q2: How transparent is the cured bond?
3001 offers near 99% transparency for an almost invisible glass-to-glass bond.

Q3: Does it resist yellowing and whitening?
Yes. 3001 provides long-term anti-yellowing and anti-whitening performance for a lasting clear finish.

Q4: Is it water resistant?
Yes. 3001 resists whitening and delamination during long soaking, making it suitable for humid environments.

Q5: What strength does it provide?
3001 has a Shore D 70 hardness, a tensile strength of 10 MPa and a shear strength of 12 MPa.

Q6: What are the storage conditions and packaging?
Store at 8-28°C in the original sealed container. Shelf life is 12 months.