Fast Curing Plastic UV Glue Description

"Instant bonding, precise curing." This fast curing plastic UV glue is specially formulated for hard-to-bond materials such as PET, PE, TPU, TAC and PP. Combined with a professional UV light source, it cures in just 3-30 seconds and enables controllable, automated bonding with a 100% yield rate on high-speed plastic assembly lines.

Fast Curing Plastic UV Glue Datasheet

Product Details Description

Product Applications

• Bonding of hard-to-bond plastics: PET, PE, TPU, TAC and PP
• Camera lens protector bonding, glass to aluminum alloy
• Optical component and precision lens assembly
• Consumer electronics plastic housing and cover glass
• Touch screen and display panel lamination
• Medical device transparent plastic assembly
• Automotive interior plastic parts and trim bonding
• Toys, packaging and label adhesion
• Acrylic (PMMA) and polycarbonate (PC) structural bonding

Precautions

• Surfaces must be clean, dry and free of oil, dust, moisture or mold release agents before applying.
• UV curing requires light to reach the adhesive; opaque or UV-blocking materials (such as black or dark-colored plastics) may not fully cure.
• Keep parts away from UV light until they are correctly positioned to avoid premature curing.
• Apply in a well-ventilated area. Avoid contact with skin and eyes; wear protective gloves and safety goggles.
• In case of skin or eye contact, rinse immediately with plenty of clean water and seek medical advice if irritation persists.
• Store sealed in a cool, dark and dry place away from direct sunlight, and keep out of reach of children.
• Cured strength may vary with substrate, gap and UV intensity; please run a bonding test before mass production.

FAQ

Q1: How fast does this plastic UV glue cure?

It cures in 3-30 seconds under a professional UV light source. Exact time depends on UV intensity, adhesive layer thickness and the substrate being bonded.

Q2: Which materials can this UV glue bond?

It is designed for hard-to-bond plastics including PET, PE, TPU, TAC and PP, and also bonds well to PMMA, ABS, PC, glass, crystal and aluminum alloy.

Q3: What UV light source and wavelength are required?

A 365nm or 395nm UV LED curing lamp is recommended. The light must reach the bond line, since UV curing requires exposure to activate.

Q4: Is the cured adhesive transparent?

Yes. After curing the glue forms a transparent, colorless bond line that will not affect the appearance of optical or transparent parts.

Q5: What is the packaging and minimum order quantity?

Standard packaging is a 50g plastic bottle, and the minimum order quantity is 10 pieces. Custom packaging is available on request.

Q6: How should the glue be stored and what is its shelf life?

Store in a cool, dark and dry place away from direct sunlight. Unopened shelf life is approximately 12 months; keep the bottle sealed after use.