10W Mesh Radio System Decentralized Transceivers Supports Adaptive Frequency Hopping 100KM
This Mesh radio system features self-forming and self-healing capabilities. Decentralized transceiver nodes can communicate directly with each other without relying on a central hub, providing a powerful, IP-addressable network for data, voice, and video. It enables long-distance, off-grid communication by allowing signals to "hop" between nodes, making it highly suitable for mobile video transmission, disaster response, and drone UAV operations.
Key Features
- TDD Duplex mode operation
- Maximum 100Mbps Iperf throughput
- Support star networking, mesh networking and hybrid networking
- Support FHSS (Frequency Hopping Spread Spectrum) technology
- Security: data protected with AES128 encryption
Technical Specifications
| Model Number |
HCL615-5*2 |
| Product Name |
10W Mesh Radio System Decentralized Transceivers Supports Adaptive Frequency Hopping 100KM |
| Modulation |
TDD OFDM |
| Frequency |
566~678MHz, 1420~1530MHz |
| FHSS |
Supported |
| Bandwidths |
3MHz, 5MHz, 10MHz, 20MHz, 40MHz |
| Throughput |
Maximum 100Mbps |
| RF Transmission Power |
5W*2 (2 channels) |
| Constellation |
QPSK, 16QAM, 64QAM self-adaptation |
| Sensitivity |
-102dBm (1Mbps) |
| Ethernet Ports |
2 * Ethernet ports for IP data transmission |
| Serial Ports |
2 channels TTL 3.3V UART (default), RS232 optional |
| SBUS Ports |
SBUS-in and SBUS-out ports for SBUS signal transmission |
| Transmission Range |
100km |
| Management |
Web UI and Control UART |
| Encryption |
AES128 |
| Networking Mode |
Centerless Point to Point, Point to Multipoint, Relay, Mesh networking |
| Maximum Number of Nodes |
64 nodes |
| Movement Speed |
Supports ≥240km/h |
| Power Input |
28V |
| Power Consumption |
1.6A@28V(access node) and <0.9A@28V(central node) |
| Dimensions |
113.9*83.7*24.5mm |
| Weight |
256g |
Input/Output Ports
| I/O |
Description |
| Ethernet*2 |
2 channel 4Pin GH1.25mm lockable connector, bridged inside with same IP address |
| UART1 |
TTL3.3V data UART, 3Pin GH1.25mm lockable connector, can be changed to RS232 as requirement. |
| UART2 |
TTL3.3V data UART, 3Pin GH1.25mm lockable connector, can be changed to RS232 as requirement. It can be set as control uart via web UI. |
| Sbus |
3Pin GH1.25mm lockable connector. Sbus-in and Sbus-out. |
| Power-in |
XT30PW-M connector |
| ANT1 |
Tx/Rx Antenna port, SMA female |
| ANT2 |
Tx/Rx Antenna port, SMA female |
Applications
This Mesh radio system is widely used in public security, armed forces, and fire protection applications. It is critical for BVLOS (beyond visual line of sight) drones UAV video data transmission operations.
Frequently Asked Questions
Q1. This video data links supports IP cameras - what if I want to use a camera with HDMI or SDI video output?
The default video input is IP RJ45 Ethernet port. For cameras with HDMI, SDI, AHD, or AV output, our mini encoder device is required to encode the video and audio signals into digital data for transmission.

At the receiver end, you can connect directly to computers or NVRs. For HDMI monitor output, our decoder device converts the digital data back to HDMI video and audio signals.