80km Aircraft Video Data Link Transmitter 28V IP TDD Frequency Hopping Transceiver
Key Features
- TDD OFDM FHSS wireless transceiver for video data Link
- Maximum 30Mbps @20MHz bandwidth
- Networking type communication: point-to-point and point-to-multipoint Networking
- Web UI or Serial uart for management
- 2 Ethernet and 3 channel uart for UAV data link
Product Description
HCL536-5W-S80 video data link was designed for video data wireless transmission with two-way wireless data link. It support 806~826MHz, 1428~1468MHz and 2402~2482MHz, with frequency hopping spread spectrum automatic technology (FHSS) to ensure secure and stable signal communication. Ideal for long range UAV communication data links.
Technical Specifications
| Name | 80km Aircraft Video Data Link Transmitter 28V IP TDD Frequency Hopping Transceiver |
| Modulation | TDD OFDM |
| Frequency | 806~826MHz, 1428~1468MHz and 2402~2482MHz |
| FHSS | Support |
| Bandwidths | 1.4/3/5/10/20MHz |
| Throughput | Maximum 30Mbps@20MHz |
| RF Transmission Power | 2W or 5W |
| Constellation | QPSK,16QAM,64QAM self adaption |
| Sensitivity | -108dBm(1Mbps) |
| Ethernet ports | 2 * Ethernet ports |
| Serial ports | 3 channels, 3*RS232, 3*TTL or 2*RS232/TTL + 1*Sbus |
| Transmission Range | 80km (UAV to Ground) |
| Management | Web UI and Control Uart |
| Encryption | AES128 |
| Networking Mode | Point to Point, Point to Multipoint, Relay, if need Mesh, please specify |
| Movement Speed | Support no less than 300km/h |
| Power Input | 12~18V(2W), 24~28V(5W) |
| Power Consumption | <12W(RF Power 2W), <22W(RF Power 5W) |
| Dimensions | 103.4*61.4*22mm |
| Weight | 142g |
Input/Output Connections
| Port | Description |
| Ethernet 1 | 4Pin ZH1.5mm connector, bridged with Ethernet2 |
| Ethernet 2 | RJ45 connector, bridged with Ethernet1 |
| Uart* 3 | 3Pin GH1.25mm lockable connector*3, 3 channel uart, RS232/TTL/Sbus optional |
| Power in | XT30PW-M connector |
| ANT 1 | Tx/Rx Antenna port, SMA female |
| ANT 2 | Rx Antenna port, SMA female |
Appearance of the Video Data Link Transmitter
The data from the central node to the access node is referred to as downlink, while the data from the access node to the central node is called uplink. The ratio of uplink and downlink data streams can be controlled through the Web UI.
Network Configuration Examples
HCL536 supports multiple networking modes:
Point-to-Point Network
Point to Multipoint Network
Relay Network
Frequently Asked Questions
Q1. This video data link transmitter seems to support IP camera, but I want HDMI or SDI video input?
A: The default video input is IP RJ45 Ethernet port. For cameras with HDMI, SDI, AHD or AV output, we recommend using our mini encoder device to encode the video/audio signal into digital data for transmission. At the receiver end, you can connect directly to your computer or NVR. For HDMI monitor output, our decoder device can convert the digital data back into HDMI video and audio signals.
About Hincn
Hincn Limited is a Hong Kong company specializing in HD video wireless communication solution which was found in 2018. While our research and production center is located in Shenzhen and was established in 2015. Our company has a long-term cooperative relationship with ADI, Xilinx, Altera and Morningcore. We are the third-party design partner for both ADI and Morningcore. Our wireless video transmitter and receivers are Widely used in UAV, Vessel,Vehicle to centre wireless video and data remote control and ect.
We offers full customization, design customization, and sample customization services.
- Twelve months free warranty for equipment
- Three months for components
- Replacement parts will be charged after one year