Ultimate Tensile Strength 100KN/M Woven Coated Bitumen Fiberglass Geogrid Reflective Cracking Asphalt Driveway

Fiberglass Geogrid 100 100 Key Characteristics and Advantages:

Fiberglass Geogrid 100-100 is a workhorse material in geotechnical engineering.

It's a biaxial, high-strength, and durable grid used to make soil stronger, stabilize weak ground,

and create longer-lasting, more cost-effective paved areas by improving the performance of the aggregate layers

How Fiberglass Geogrid Reflective Cracking Happens ?

1.An existing concrete slab or old, cracked asphalt driveway develops cracks.

2.These cracks move due to thermal expansion/contraction (temperature changes) and traffic loading.

3.When you pave a new layer of asphalt over it, these movements in the old layer transfer upward through the new, weak layer.

4.Within a short time (often just one or two seasons), the exact same crack pattern appears in your brand new driveway.

What Means Fiberglass Geogrid Tensile Strength 100KN/M ?

• 100-100: This is the most important part of the specification.

It denotes the minimum ultimate tensile strength per unit width in the machine direction (MD)

and cross-machine direction (CMD), measured in kN/m (kiloNewtons per meter).

• The first 100 means it has a minimum ultimate tensile strength of 100 kN/m in its longitudinal direction (along the roll length).

• The second 100 means it has a minimum ultimate tensile strength of 100 kN/m in its transverse direction (across the roll width).

In short, Fiberglass Geogrid 100-100 is a biaxial (equally strong in both directions) geogrid made from fiberglass,

with a strength rating of 100 kN/m.

Fiberglass Geogrid Specification

Before Coated Bitumen After Coated Bitumen

Mesh Size 25.4x25.4mm Mesh Size 12.8x 12.8 mm

Key Benefits:
✔ Optimal Load Distribution – Reduces stress and prevents reflective cracking
✔ Asphalt-Compatible – Bitumen-coated for superior adhesion in paving applications
✔ High Tensile Strength – 50 kN/m in both directions (longitudinal & transverse)
✔ Corrosion & UV Resistant – Long-lasting durability in harsh conditions
✔ Easy Installation – Flexible, lightweight, and roll-form for quick deployment

Fiberglass Geogrid 100 100 Applications:

This specific strength (100-100) is very common and versatile. Its main uses include:

Road and Pavement Reinforcement:

Laid on soft subgrade before placing the aggregate base course.

It reduces rutting, extends pavement life, and allows for a thinner base layer, saving cost.

Soil Stabilization: Used to build stable working platforms on very soft soils (like clay or peat),

allowing construction equipment to operate.

Asphalt Overlay Reinforcement:

A specialized application where a fiberglass geogrid is embedded in asphalt to retard reflective cracking from old pavement layers.

Landfill and Embankment Support: Provides tensile strength to soil structures.

Parking Lots and Access Roads: A very common application for this strength class.

Fiberglass Geogrid Reflective Cracking Conclusion:

Using a fiberglass geogrid for reflective cracking is a proven, engineered solution that can

significantly extend the life of an asphalt overlay on a cracked driveway.

It is not a DIY-friendly product and its success is 100% dependent on correct installation

by a knowledgeable asphalt paver. When done right, it is one of the most effective ways

to prevent your old driveway's problems from haunting your new one.

Yixing Shenzou Geosynthetics more geotechnical material solutions,

Welcome to contact Yixing Shenzhou Amelie Dai

Email : amelie@geogrid-cn.com

Mob/Whatsapp : 0086 13815119816

To Get Free Sample!!!