MachineU > China Products > Tools & Hardware > Hardware > Springs
ISO10243 Single Turn Wave Spring ASTM F2673 Precision Machinery Wave Spring Washer
ISO10243 Single Turn Wave Spring ASTM F2673 Precision Machinery Wave Spring Washer
Specifications
Place of Origin :
Sihong, China
Brand Name :
Sunzo
Certification :
CE/IATF16949/45001/14001/9001
MOQ :
Negotiable
Price :
Negotiable
Packaging Details :
Carton
Delivery Time :
Negotiable
Payment Terms :
Negotiable
Inspection magnification :
10x
Wave height deviation :
±0.02mm
Free length tolerance :
±0.1mm
Load testing deflection :
30% and 70% of rated
Ultrasonic cleaning time :
10 minutes
Cleaning temperature :
40°C
Drying pressure :
0.5MPa max
Particle filtration class :
ISO 4406 Class 16/13
Compression limit :
80% of max rated deflection
Force reduction threshold :
5%
Temperature range :
-40°C to 200°C
PTFE lubricant thickness :
5-10μm
Material 1074 inspection :
3-month intervals
Material 65Mn inspection :
6-month intervals
Material SUS304 inspection :
Annual or 2 years
Thermal shock testing :
Quarterly
Corrosion protection pH :
6-8
Hydrogen embrittlement focus :
1074 Carbon Steel
Fatigue crack focus :
65Mn Spring Steel
Pitting corrosion focus :
SUS304 Stainless Steel
Description
Waved Spring Maintenance Guidelines
Proper maintenance protocols are critical for maximizing the service life of waved springs in precision machinery applications. As engineered elastic elements with contoured peaks and valleys, waved springs (wave springs) require systematic care to preserve their mechanical integrity and performance. This technical guide outlines industry-proven maintenance procedures, material-specific considerations, and diagnostic techniques to ensure optimal functionality in critical systems.
Preventive Maintenance Fundamentals
Regular Inspection Regimen:
  • Visual examination every 500 operating hours using 10x magnification to detect micro-cracks, corrosion pits, or deformation (per ISO 10243)
  • Dimensional verification with calibrated micrometers: check wave height deviation (maximum allowable ±0.02mm) and free length tolerance (±0.1mm)
  • Load testing at 30% and 70% of rated deflection to confirm force output consistency (ASTM F2673 compliance)
Contamination Control:
  • Ultrasonic cleaning with aqueous detergent (pH 6-8) for 10 minutes at 40°C, followed by compressed air drying (max 0.5MPa pressure)
  • For oil-lubricated systems: implement particle filtration (ISO 4406 Class 16/13) to prevent abrasive wear between wave crests
  • Avoid contact with chlorinated solvents that may degrade surface treatments
Material-Specific Maintenance
Material Corrosion Protection Inspection Focus Maintenance Interval
1074 Carbon Steel Phosphate coating + oil immersion Rust formation, hydrogen embrittlement 3-month intervals in humid environments
65Mn Spring Steel Black oxide + wax sealant Fatigue cracks at wave roots 6-month intervals for dynamic applications
SUS304 Stainless Steel Passivation treatment Pitting corrosion in chloride environments Annual inspection (extend to 2 years in cleanrooms)
Failure Prevention Strategies
Compression Limit Management:
  • Never exceed 80% of the spring's maximum rated deflection (calculated as Lfree - Lsolid × 0.8)
  • Use mechanical stops or torque-limiting tools during installation to prevent over-compression
  • Monitor load-deflection curves annually; a >5% force reduction indicates fatigue onset
Environmental Control:
  • For temperature cycling applications (-40°C to 200°C), implement thermal shock testing quarterly (per MIL-STD-883 Method 1011)
  • In corrosive environments, apply PTFE-based dry film lubricant (thickness 5-10μm) to reduce friction and chemical attack
SUNZO Technical Support
Our engineering team provides:
  • Condition Assessment Services: On-site ultrasonic thickness measurement and residual stress analysis
  • Custom Maintenance Schedules: Tailored to application parameters (load frequency, temperature, environment)
  • Replacement Program: Predictive failure analysis using FEA simulation of fatigue life based on operating data
SUNZO's maintenance-certified waved springs include traceable material certificates (EN 10204 3.1) and maintenance data log templates. Contact our technical support team for ISO 17025 accredited testing services to validate spring performance during scheduled maintenance intervals.
ISO10243 Single Turn Wave Spring ASTM F2673 Precision Machinery Wave Spring Washer
Send your message to this supplier
Send Now

ISO10243 Single Turn Wave Spring ASTM F2673 Precision Machinery Wave Spring Washer

Ask Latest Price
Product Detail
Place of Origin :
Sihong, China
Brand Name :
Sunzo
Certification :
CE/IATF16949/45001/14001/9001
MOQ :
Negotiable
Price :
Negotiable
Packaging Details :
Carton
Contact Supplier
ISO10243 Single Turn Wave Spring ASTM F2673 Precision Machinery Wave Spring Washer

Jiangsu Sunzo Spring Elasticity Technology Co., Ltd

Verified Supplier
1 Years
nanjing
Since 2006
Business Type :
Manufacturer, Exporter, Seller
Main Products :
DIN 2093 Disc Spring, Single Turn Wave Spring, DIN 6796 Washer
Total Annual :
1.2M-1.4M
Employee Number :
160~200
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Single Turn Wave Spring
MachineU China Products Tools & Hardware Hardware Springs
Contact Supplier
Submit Requirement