Purpose

This 24V LED bus step light is specially designed for bus and coach passenger doors. It provides clear illumination for the entry step area when passengers get on and off the vehicle. It improves safety for boarding and alighting, prevents tripping risks in dim‑light environments, and is widely used for passenger door step lighting of various coaches.

Product Features

1. Operates at DC 24V, matches the standard electrical system of buses and coaches.

2. Adopts LED light source, featuring low power consumption and long service life.

3. Durable aluminum alloy housing, anti‑collision and wear‑resistant.

4. Equipped with waterproof plug‑in connector for quick connection.

5. OEM number: 24126KJ0001, factory model SK100x55, direct replacement for original parts.

6. Compact oval structure, suitable for installation space of most bus passenger doors.

Product Advantages

1. Stable lighting performance, strong shock resistance to adapt to bumpy road conditions of bus operation.

2. Waterproof connector reduces circuit failure caused by water ingress.

3. Original‑equivalent quality, easy to purchase as maintenance spare parts.

4. Simple plug‑and‑play design, no complicated wire modification required.

5. Good heat dissipation of aluminum shell, effectively extends LED service life.

6. Strictly produced by Zhongyuan (Danyang Zhongyuan Lamp Co., Ltd.), reliable quality.

Installation Instructions

1. Cut off the 24V power supply of the bus passenger‑door circuit before installation to avoid short‑circuit damage.

2. Align the step light with the reserved mounting hole position on the passenger door step panel.

3. Fix the lamp body with the original mounting screws. Do not over‑tighten the screws to prevent deformation of the aluminum housing.

4. Insert the waterproof plug firmly into the vehicle‑side matching socket until you hear a locking click.

5. Restore the vehicle power supply, open the passenger door and test whether the light turns on normally.

6. Adjust the angle slightly if needed to ensure light covers the whole step surface.

Notes

1. Confirm the working voltage is DC 24V before installation. Never connect it to other‑voltage power source.

2. Check whether the waterproof plug and socket are free of water, dust and dirt before plugging in.

3. Do not knock or strike the lamp housing during installation.

4. Regularly clean dust and dirt on the lamp surface to keep good lighting effect.

5. Check the plug connection periodically. Loose plug will cause intermittent light failure.

6. Do not disassemble the inner LED module of the lamp by yourself, it will void the spare‑part warranty.

7. If water leakage occurs around the mounting position, solve the sealing problem to prevent water from entering the lamp.