Non-exposed Polymer Modified Asphalt Roof Waterproof Coating

Product Advantages

1. Seamless monolithic waterproofing: Liquid‑formed film without lap joints, fully covers irregular areas such as corners, pipe roots and gutters to avoid leakage at overlaps.
2. High elasticity & crack‑resistance: Cured rubber‑like film with high elongation, adapts to micro‑cracks and thermal deformation of substrate.
3. Wide substrate compatibility: Applicable on new concrete, old roof and existing asphalt membranes; works on damp substrate without standing water.
4. Flexible application: Ready‑to‑use one‑component material, supports brush, roller and spray. Cold‑applied without open‑flame, safe and efficient.
5. Strong adhesion: Firm bonding to cement substrate and old waterproof materials, less blistering and delamination.
6. Water & acid‑alkali resistance: Good resistance to water immersion and chemical corrosion, durable for basement and water tank projects.
7. Compatible composite system: Perfect match with asphalt waterproof membranes for coating‑membrane composite waterproofing.
8. Water‑based & low‑odor: Water‑based formula, coal‑tar free, user‑friendly construction environment.

Performance Indexes

Construction Procedure

1. Substrate preparation: Remove dust, laitance, oil and loose parts. Repair cracks and holes in advance. Keep surface solid, damp and free of standing water.
2. Detail reinforcement: Apply 1‑2 thin coats as extra reinforcement layer on corners, pipe roots, construction joints and cracks.
3. Material stirring: Stir thoroughly after opening bucket, no extra water dilution.
4. Multi‑layer application: Apply thin coats successively. Apply next coat only when previous one dries. Brush in cross directions to reach designed film thickness.
5. Curing protection: Natural curing. Avoid rain, ponding and mechanical damage before full curing.
6. Protective layer: Apply mortar protection after complete curing. Not suitable for long‑term direct exposure, protective covering is mandatory for exposed areas.