MachineU > China Products
Rubber Asphalt Bituminous Waterproofing Coating Creep Type Self Healing Non Curing
Rubber Asphalt Bituminous Waterproofing Coating Creep Type Self Healing Non Curing
Rubber Asphalt Bituminous Waterproofing Coating Creep Type Self Healing Non Curing
Rubber Asphalt Bituminous Waterproofing Coating Creep Type Self Healing Non Curing
Rubber Asphalt Bituminous Waterproofing Coating Creep Type Self Healing Non Curing
Rubber Asphalt Bituminous Waterproofing Coating Creep Type Self Healing Non Curing
Rubber Asphalt Bituminous Waterproofing Coating Creep Type Self Healing Non Curing
Rubber Asphalt Bituminous Waterproofing Coating Creep Type Self Healing Non Curing
Specifications
Payment Terms :
T/T
Brand Name :
shhous
Flash point, ℃ :
≥180
Model Number :
Non-curing rubber asphalt leak-proof coating
Solid content, % :
≥98
MOQ :
1 metric ton
Packaging Details :
in drums
Low‑temperature flexibility :
No cracking at ‑15 ℃
Place of Origin :
China Waterproof Industrial Park
Elongation, mm :
≥15
Price :
737.7 US dollars per metric ton
Heat resistance at 65 ℃ :
No sliding, flowing or dripping
Supply Ability :
10000 metric ton
Certification :
ISO
Bonding performance :
100% cohesive failure on both dry and damp substrate
Description

Creep-type Self-healing Non-curing Rubber Asphalt Waterproof Coating

Technical Specification for Non‑curable Rubber Modified Asphalt Waterproof Coating
1. Basic Product Information

ItemContent
Product NameNon‑curable rubber modified asphalt waterproof coating (Short name: Non‑curable)
Executive StandardJC/T 2428‑2017
Product FormBlack viscous paste
Core PropertyNon‑curing permanently, maintains creep gel state
Construction MethodHot‑melt construction (troweling / spraying)
Usage RestrictionShall be used together with waterproof membrane; prohibited for single‑layer use; for non‑exposed application only

2. Product Features

No.FeatureDescription
1Non‑curing with excellent creep performanceRemains viscous paste without hard film; absorbs and dissipates structural deformation stress, adapts to settlement and vibration
2Self‑healing & puncture‑resistant, anti‑water‑channelingSelf‑closes tiny holes and micro‑cracks; fully adheres to concrete / steel substrates to eliminate water‑channeling passages
3Excellent bonding compatibilityCompatible with SBS and self‑adhesive membranes; direct hot bonding; applicable for damp substrate (no standing water allowed)
4High solid content, solvent‑free & eco‑friendlySolid content ≥98%, no solvent volatilization; one‑step hot‑melt forming; lay membranes while hot for high construction efficiency
5Temperature and corrosion resistanceNo cracking at ‑20 ℃, no flowing at 65 ℃; resistant to acid, alkali and salt, suitable for corrosive underground environment

3. Main Technical Indicators

No.ItemTechnical Requirement
1AppearanceUniform black paste, no caking and no impurities
2Solid content≥98%
3Flash point≥180 ℃
4Elongation≥15 mm
5Low‑temperature flexibilityNo cracking at ‑20 ℃
6Heat resistanceNo sliding, flowing or dripping at 65 ℃
7Bonding performance100% cohesive failure on dry / damp substrate
8Self‑healing propertyNo water seepage
9Anti‑water‑channeling performanceNo water seepage under 0.6 MPa

4. Scope of Application

Application FieldLocation / Scenario
Underground WorksBase slab, roof slab, side wall; reinforcement for pipe roots, post‑pouring belts, construction joints, deformation joints; subway and tunnel
Roof WorksNon‑exposed roof, green roof; detail additional layers for internal‑external corners, drain outlets
Renovation WorksOld roof and underground waterproof repair & reconstruction

5. Construction Technical Parameters

ItemParameter / Requirement
Heating temperature (troweling)150‑170 ℃
Heating temperature (spraying)160‑180 ℃
Maximum heating temperatureShall not exceed 200 ℃
Design thickness (Grade‑Ⅰ waterproofing)≥2.0 mm
Design thickness (Grade‑Ⅱ waterproofing)≥1.5 mm
Theoretical consumption1.2‑1.4 kg/㎡ for 1 mm thickness
Package specificationIron drum, 20 kg/drum (common)

6. Construction & Precautions

ItemRequirement
Construction conditionsNo construction in rainy weather or wind force ≥ Grade 5; no standing water on substrate
Key procedureLay waterproof membrane immediately while coating is hot; do not apply after cooling and skin formation
Membrane lap jointDo not bond laps with non‑curable coating; keep lap joints clean, seal by membrane hot‑melt / self‑adhesion
Usage restrictionCannot be used as independent waterproof layer
Heating safetyDirect open‑flame baking to coating is forbidden
Protective layerApply fine‑aggregate concrete / mortar protective layer promptly after completion; prohibit long‑term direct sunlight exposure

Rubber Asphalt Bituminous Waterproofing Coating Creep Type Self Healing Non Curing
Rubber Asphalt Bituminous Waterproofing Coating Creep Type Self Healing Non Curing

Send your message to this supplier
Send Now

Rubber Asphalt Bituminous Waterproofing Coating Creep Type Self Healing Non Curing

Ask Latest Price
Watch Video
Product Detail
Payment Terms :
T/T
Brand Name :
shhous
Flash point, ℃ :
≥180
Model Number :
Non-curing rubber asphalt leak-proof coating
Solid content, % :
≥98
MOQ :
1 metric ton
Contact Supplier
video
Rubber Asphalt Bituminous Waterproofing Coating Creep Type Self Healing Non Curing
Rubber Asphalt Bituminous Waterproofing Coating Creep Type Self Healing Non Curing
Rubber Asphalt Bituminous Waterproofing Coating Creep Type Self Healing Non Curing
Rubber Asphalt Bituminous Waterproofing Coating Creep Type Self Healing Non Curing

Weifang Shihua Chemical Building Material Co., Ltd.

Verified Supplier
1 Years
shandong
Since 2000
Business Type :
Manufacturer, Exporter
Main Products :
Polyethylene Waterproofing Membrane, SBS Waterproofing Membrane, Self Adhesive Waterproofing Membrane
Total Annual :
17790000-17790000
Employee Number :
150~200
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Bituminous Waterproofing Coating
MachineU China Products
Contact Supplier
Submit Requirement