JK810 Crawler Water Well Drilling Rig

The JK810 is our crawler drilling rig that most customers buy for water wells. It drills 90 to 140 mm holes and goes down about 60 meters with a 3-inch or 4-inch DTH hammer. Farmers use it for irrigation wells, villages use it for drinking water boreholes, and contractors use it for dewatering and small geotech jobs.

Everything is on one machine. The diesel engine, the screw compressor, the hydraulic pack and the mast all sit on a single crawler base. You drive it to the spot, level the mast, and start drilling. There is no separate compressor to tow and no long air hose to connect. One operator handles the whole job, including adding and removing the 3-meter drill rods with the hydraulic loader.

Why it works for water well work

• Gets through mixed ground. Soft soil, clay, weathered rock, and hard rock all come up with the right hammer and bit combination. You are not stuck with one formation type.
• Holds its position. The 350 mm steel tracks and low ground pressure keep it stable on soft farm tracks and uneven ground, so the hole stays straight.
• Runs a full shift. The 120-liter fuel tank normally covers a whole working day without stopping to refill.
• Easy to move between wells. It drives itself between sites at up to 2.5 km/h, so you can hop from one borehole to the next without a trailer.

JK810 key specs

What buyers should know

We quote each order against the rock you are drilling and the depth you need. Tell us your borehole diameter, target depth, and what the ground is like, and we will spec the hammer, bit and rod package to match. We ship a starter spares kit with every machine, plus an English manual and video guides. Warranty is 12 months or 2,000 hours.

Delivery runs about 35 to 55 working days. We load into a 40ft high-cube container, flat-rack, or Ro-Ro vessel, and handle the full export documents. If you are drilling water wells in Africa, Southeast Asia, Central Asia or South America, we have most likely shipped there before.

Send us your project details and we will put a quote together with shipping to your port.