Self Stick Insulation Support Nail With Self Locking Washer
Product Specifications
| Attribute |
Value |
| Name |
Insulation Support Nail |
| Type |
Self adhesive pin |
| Base size |
2 inches square type |
| Nail length |
25 mm - 280 mm |
| Nail diameter |
2.7 mm, 3 mm |
| Finished |
Copper coated, zinc coated |
| Install |
Self locking clips |
| Factory |
Huihao hardware |
Product Features
- Pin diameter options: galvanized annealed steel wire and aluminum wire
- Stainless steel soft wire available for custom orders
- Maximum pin length: 300mm
- Customizable base size, pin diameter, and length
- Zinc coated surface treatment for mild steel material
- Special materials available for customization
Installation Guide
- Best results when ambient temperature is above 40°F at time of application
- Remove release paper from base plate and apply to suitable flat surface
- Use firm, straight forward pressure (do not twist)
- Do not remove release paper until ready to apply hanger
- Insulation may be applied immediately after securing hanger
- Store at 75°F and 50% relative humidity with stock rotation
- Shelf life: 2 years when stored as recommended
Performance Tape Specifications
- Polyethylene foam with aggressive pressure sensitive rubber resin adhesive
- Service temperature: -40°C to +70°C
- Highly resistant to abrasion, corrosion, and moisture
- Complies with European Directive 2000/53 (Lead, Chromium VI, Mercury, Cadmium free)
- 10 minutes 180° peel adhesion: 30 N/25mm
- 500 hour static shear (stainless steel): 0.8 kg/cm³
Standard Specifications
| Nail diameter |
Base size |
Common nail lengths |
Fixed parts |
| 12 Ga (2.7mm or 0.106") |
2"×2" base (50mm×50mm) |
1" |
- Self locking type washers
- Speed clips
- Dome cap washer
|
| 12 Ga (2.7mm or 0.106") |
2"×2" base (50mm×50mm) |
1 1/2" |
| 12 Ga (2.7mm or 0.106") |
2"×2" base (50mm×50mm) |
1 5/8" |
| 12 Ga (2.7mm or 0.106") |
2"×2" base (50mm×50mm) |
3 1/2" |
| 12 Ga (2.7mm or 0.106") |
2"×2" base (50mm×50mm) |
4 1/2" |
| 12 Ga (2.7mm or 0.106") |
2"×2" base (50mm×50mm) |
5 1/2" |
| 12 Ga (2.7mm or 0.106") |
2"×2" base (50mm×50mm) |
6 1/2" |
Why Choose Our HUIHAO Insulation Fasteners?
1. Premium quality materials for all insulation fasteners
2. Copper plating, zinc coating, and phosphating pretreatment
3. Multi-station cold forging for superior mechanical properties
4. Automatic riveting machine installation
5. Rust prevention suitable for long sea shipments
6. Short delivery times through efficient production management