Overview

CN055 is HIOKI exclusive LAN-CAN conversion gateway developed for automotive new energy vehicle integrated testing. It solves the core pain point of synchronous data fusion between bench measuring instruments and vehicle on-board CAN bus system. Connect to LR8450 data loggers, PW3390/PW6001 power analyzers via LAN cable, convert all collected power, temperature, current measurement data into standard CAN messages and send to vehicle ECU network. Equipped with 3 independent CAN channels (CAN0/CAN1/CAN2), simultaneously read original vehicle CAN signals such as motor speed, battery SOC, brake status for one-stop synchronous analysis. Minimum 10ms ultra-fast data refresh interval ensures high time consistency between measurement waveform and vehicle control signals. Wide DC 9~30V power input supports direct power supply via vehicle OBD port, compact metal housing with vibration resistance meets vehicle road test standards, and cloud server access realizes remote real-time data monitoring through Wi-Fi/4G module expansion.

Core Features

1. Bidirectional LAN-CAN signal conversion, match LR8450 / PW3390 / PW6001 full series HIOKI measuring instruments
2. 3 independent CAN bus channels, support simultaneous read/write multi-group CAN messages
3. Ultra-fast data transmission interval: minimum 10ms for synchronous waveform & ECU signal matching
4. Max 32 CAN messages (64 signals) transmitted per cycle, cover multi-channel power measurement parameters
5. Wide DC power input 9V~30V, direct power supply via vehicle OBD interface for road test
6. Support external Wi-Fi/4G module expansion, realize cloud remote real-time data monitoring
7. Vibration-resistant industrial metal housing, comply with passenger vehicle road test standard JIS D 1601
8. Free dedicated configuration software, one-click CAN message scaling & parameter setup
9. Simultaneous acquisition of instrument test data + original vehicle ECU CAN signals for integrated analysis
10. Built-in signal isolation protection, avoid ground loop interference during vehicle high-voltage testing

Application Scenarios

New energy vehicle drive motor powertrain bench synchronous ECU test, EV battery pack charge/discharge CAN signal fusion analysis, electric bus/truck road real-time data remote monitoring, automotive OBC/DC-DC converter power & vehicle CAN signal correlation test, vehicle control unit (VCU) matching calibration laboratory testing, energy storage converter CAN bus power data integrated collection.