MachineU > China Products > Construction & Real Estate > Building Boards > Sandwich Panels
Thermal Break PUR Insulation Board 60 mm Closed Cell Core For Roof Wall Panels
Thermal Break PUR Insulation Board 60 mm Closed Cell Core For Roof Wall Panels
Specifications
Core Density :
45 - 55 kg/m3 (50 +/- 5)
Thickness :
60 mm
Type :
Polyurethane Rigid Foam
MOQ :
1 carton
product name :
Thermal Break PUR Insulation Board for Roof and Wall
Standard Size :
1200 x 600 mm
Compressive Strength :
≥ 150 kPa
Water Absorption :
< 1% by volume
Packaging Details :
Cartons / PE Bags
Fire Resistance :
Class B-s1,d0 (EN 13501-1)
Density :
30 - 40 kg/m³
Thermal Conductivity :
0.022 - 0.028 W/m·K
Application :
Roof and wall insulation panels for warehouses and cold stores
Installation Method :
Adhesive bonding, mechanical fixing
Operating Temperature Range :
-50°C to +120°C
Dimensional Stability :
≤ 1% change
Supply Ability :
Subject to order quantity and specifications
Payment Terms :
T/T
Core Material :
Polyisocyanurate (PIR)
Model Number :
PUR-B60
Service Temperature :
-80 to 100 C
Moisture Vapor Transmission :
Low permeability
Delivery Time :
2-3weeks
Brand Name :
MYREAL
Panel Thickness :
20 mm to 200 mm
Certification :
ISO、SGS、CE
Product Type :
Rigid PUR roof and wall insulation board
Fire Performance :
GB 8624 Class B1, self extinguishing
Place of Origin :
China
Environmental Impact :
CFC/HCFC free, recyclable
Surface Facing :
Aluminum foil, glass tissue, or kraft paper
Description

Thermal Break PUR Insulation Board 60 mm Closed Cell Core for Roof Wall Panels

Roof and wall panels only perform as well as the board inside them. This 60 mm PUR board is foamed to fifty kilograms per cubic metre and trimmed square, so a laminator can bond steel facings without voids that later show as cold bridges. The closed cell core is rigid enough to span between purlins without sagging into the cavity.

Declared conductivity is 0.023 W/(m.K) and compressive strength is above 200 kPa, which covers installation traffic and the point loads of service equipment. Thermal break PUR boards keep their U value through years of cycling because closed cells neither collapse nor absorb water the way open cell foam does.

We supply boards in matched batches for single projects, so a facade package and a roof package produced weeks apart still share density and thickness. For export, boards are strapped in bundles with edge protection and loaded to suit container weight limits.

Thermal break PUR boards are checked for thickness at four points before packing. Where a steel frame would otherwise bridge the insulation, a thermal break PUR board is cut to the stud spacing, and each thermal break PUR board is checked for square edges. A thermal break PUR board ordered for a cold climate facade is supplied with foil facing, and on refurbishment work the thermal break PUR board fixes over the existing lining so the wall line stays unchanged.

Key Advantages

  • Closed cell PUR core gives panel stiffness without extra framing
  • Conductivity 0.023 W/(m.K) supports thin roof and wall build ups
  • Compressive strength above 200 kPa resists roof traffic
  • Oxygen index above 30 percent with self extinguishing behaviour
  • Boards keep U value through repeated thermal cycling
  • Matched density across batches keeps panels consistent

Technical Specifications

product nameThermal Break PUR Insulation Board for Roof and Wall
Product TypeRigid PUR roof and wall insulation board
Core MaterialRigid polyurethane foam, closed cell
Core Density45 - 55 kg/m3 (50 +/- 5)
Thermal Conductivity<= 0.023 W/(m.K) at 20 C
Compressive Strength>= 200 kPa
Water Absorption<= 5% volumetric
Fire PerformanceGB 8624 Class B1, self extinguishing
Service Temperature-80 to 100 C
Thickness60 mm
Standard Size1200 x 600 mm
ApplicationRoof and wall insulation panels for warehouses and cold stores

Typical Applications

  • Insulated roof panels on steel frames
  • Wall cladding for warehouses and cold stores
  • Over clad and refurbishment panels
  • Agricultural building envelopes
  • Modular unit walls
  • Industrial partition and ceiling panels

Frequently Asked Questions

Q: Which thickness is usual for roof panels?

A: Roof panels typically use 60 to 100 mm depending on the U value target, and boards can be laminated to the exact thickness before shipment.

Q: Can you supply the board already bonded to steel?

A: Yes, either loose core for your line or finished sandwich panels from our lamination line.

Q: How is the board protected in transit?

A: Bundles are strapped with corner boards and stretch film, and the container plan is checked against weight limits.

Q: Is a fire retardant grade available?

A: Standard production is class B1 and self extinguishing, and a higher oxygen index grade can be produced on request.

MYREAL supplies PUR roof and wall insulation boards from Shanghai to projects in Europe, the Middle East and Southeast Asia. Contact our technical team for datasheets, samples and container plans.

Send your message to this supplier
Send Now

Thermal Break PUR Insulation Board 60 mm Closed Cell Core For Roof Wall Panels

Ask Latest Price
Product Detail
Core Density :
45 - 55 kg/m3 (50 +/- 5)
Thickness :
60 mm
Type :
Polyurethane Rigid Foam
MOQ :
1 carton
product name :
Thermal Break PUR Insulation Board for Roof and Wall
Standard Size :
1200 x 600 mm
Contact Supplier
Thermal Break PUR Insulation Board 60 mm Closed Cell Core For Roof Wall Panels

Myreal Energy Saving (Shanghai) Co., Ltd.

Verified Supplier
1 Years
shanghai, shanghai
Since 2014
Main Products :
Ceramic Foam Insulation, Foam Rubber, K-FLEX Foam Rubber
Total Annual :
5000000-10000000
Employee Number :
11~50
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products PUR PIR
MachineU China Products Construction & Real Estate Building Boards Sandwich Panels
Contact Supplier
Submit Requirement