Easy-Sanding Car Body Putty With High Intensity Effect For Car

Product Description:

Body filler Putty, also known as unsaturated resin putty, is the main ash made of unsaturated resin, talc, styrene and other materials after stirring and grinding. It is a two-component filling material with fast curing and drying speed and strong adhesion,easy to polish and so on.

Performance introduction:

1.MJ-Coat polyester putty

-Equipped with BPO/CHPO hardener.

-BPO:Fast air drying, Delicate texture, few sand holes, good temperature resistance, excellent scraping performance, and good adhesion on various metal materials (except the surface of anodized aluminum oxide).

-CHPO: Fast air drying, Delicate texture, few sand holes, good temperature resistance, excellent scraping performance, and good adhesion on 2K epoxy primer surface.

Physical properties

Product Introduction

Application process:

Usage:

1.Remove the oil,rustoriginal paint film and water etc from surface completely, keep the painted surface clean & dry before scraping.

2.The putty and hardener should be mixed completely to achieve the uniformity of color(qeneral ratio is100:1.5-3 by weight),and apply the mixture within pot life(3-8min),or it will gel.

Notes:

1. If there is air bubble penetration during coating and scraping, it must be completely scraped with a scraper to ensure good adhesion

2.Special hardener shall be provided and shall not be mixed with other hardener.

3. It can be stored in a cool place (below 25 ℃) for 12 months.

4.The putty added with hardener shall not be put back into the original tank, and shall be capped after use to avoid the deterioration of the main putty caused by solvent volatilization. It is strictly prohibited to dilute the putty with solvent such as thinner for construction.

Company profile