Car Repair Material Car Body Putty With High Adhesion Effect For Auto

Performance introduction:

1.MJ-Coat polyester putty

-Equipped with BPO/CHPO hardener.

-BPO:Fast air drying, Delicate texture, few sand holes, good temperature resistance, excellent scraping performance, and good adhesion on various metal materials (except the surface of anodized aluminum oxide).

-CHPO: Fast air drying, Delicate texture, few sand holes, good temperature resistance, excellent scraping performance, and good adhesion on 2K epoxy primer surface.

Product List

Display

Product Introduction

Application process:

Usage:

1.Remove the oil,rustoriginal paint film and water etc from surface completely, keep the painted surface clean & dry before scraping.

2.The putty and hardener should be mixed completely to achieve the uniformity of color(qeneral ratio is100:1.5-3 by weight),and apply the mixture within pot life(3-8min),or it will gel.

3.Apply the mixed putty to the processed surface of primer or cold-reduced sheet in case of scraping of thick coat, it is preferable to apply in thin coats for several times till reaching the objective thickness.(Suggested maximum thickness is no more than 5mm).

Notes:

1. If there is air bubble penetration during coating and scraping, it must be completely scraped with a scraper to ensure good adhesion

2. The putty added with hardener shall not be put back into the original tank, and shall be capped after use to avoid the deterioration of the main putty caused by solvent volatilization. It is strictly prohibited to dilute the putty with solvent such as thinner for construction.

3.Special hardener shall be provided and shall not be mixed with other hardener.

4. It can be stored in a cool place (below 25 ℃) for 12 months.

Company profile