ACSR Bare Conductor is designed for overhead transmission lines with simple structure, easy installation, low line cost, large transmission capacity, and suitability for special geographical conditions such as crossing rivers and valleys.
All Aluminium Conductor (AAC) is made up of one or more strands of hard drawn 1350 aluminum alloy, used as bare overhead conductor for distribution lines. Extensive use in urban areas where spans are usually short but high conductivity is required.
| Code Name | Total Area | Stranding and Wire Diameter | Approximate Overall Diameter | Linear Mass | Nominal Breaking Load | Maximum Resistance at 20℃ |
|---|---|---|---|---|---|---|
| Peachbel | 6 | 7/1.554 | 4.67 | 37 | 249 | 2.1692 |
| Rose | 4 | 7/1.961 | 5.89 | 58 | 396 | 1.3624 |
| Iris | 2 | 7/2.474 | 7.24 | 93 | 597 | 0.8577 |
| Pansy | 1 | 7/2.776 | 8.33 | 117 | 732 | 0.6801 |
AAAC aluminum alloy conductor is 1% higher conductivity than steel core aluminum stranded wire of the same cross-section, without power loss. Widely used in overhead power distribution and transmission lines, especially near ocean coastlines.
| Code Word | Conductor Size | Stranding | Sectional Area | Diameter of Conductor | Linear Density | Rated Strength | D.C. Resistance at 20°C |
|---|---|---|---|---|---|---|---|
| Box | 15 | 7/1.85 | 18.82 | 5.55 | 51 | 537 | 1.5370 |
| Acacia | 20 | 7/2.08 | 23.79 | 6.24 | 65 | 680 | 1.3840 |
| Almond | 25 | 7/2.34 | 30.1 | 7.02 | 82 | 861 | 1.0934 |
ACSR Conductor Steel core aluminum stranded wire features simple structure, easy installation and maintenance, low line cost, large transmission capacity, and suitability for special geographical conditions. Widely used in overhead transmission and distribution lines of various voltage levels.