Stop production, not available.
MC060S RC Microwave Motion Sensor On-off Control Can Be Set Via MH03 REMOTE CONTROL
| Input | Input Voltage | 198-264V AC 50Hz | |
| Rated Input Voltage | 220-240V AC 50Hz | ||
| Stand-by Power | ≤ 0.5W | ||
| Output | Load Power | 250W (Inductive) 500W(Resistive) | |
| Sensor Parameters | Hold Time | 5s/30s/90s/3min/20min/30min Remote control:10S/90S/3min/10min | |
| Sensing Range | 100%/75%/50%/25% Remote control:100%/50% | ||
| Daylight Sensor | Disable/50Lux/25Lux/10Lux/2Lux Remote control:5Lux/15Lux/50Lux/Disable | ||
| Mounting Height | Ceiling Mounting:3-6m | ||
| Detection Area | Walking 0.5-1m/S keep walking≥2mwalk & stop≥5m | ||
| Wireless Parameters | Operating frequency | 5.8 GHz ±75 MHz | |
| Dimming control | 0N/0FF | ||
| Operating Environment | Operating temperature | -25℃ - +60℃ | |
| Storage temperature | N/A | ||
| Safety & EMC
| Isolation pressurization | N/A | |
| EMC | EN55015 | ||
| Certificate requirement | TUV | ||
| Others | Wiring method | Press fit terminal (4) | |
| IP rating | IP20(Built-in) | ||
| Protection Class | Class II | ||
| Installation Size | 168*21*28mm | ||
| Packaging requirement | Clapboard +Outer Carton (K=A) | ||
| Life | 50000h | ||


