The GS4 Plus sits on the extended body, so its rear door is wider and carries more glass than the standard GS4. This kit uses actuators rated for that extra mass and brackets cut for the Plus hinge position, which differs from the other GS4 versions.
The GS4 family is sold in several forms and buyers often order the wrong one. Use this table to match the vehicle before ordering:
| Body | Recognition | Actuator Rating |
|---|---|---|
| GS4 first generation | Original tailgate skin, narrow lid | 510 N |
| GS4 II | Revised hinge casting, redesigned skin | 530 N |
| GS4 Coupe | Fastback lid with spoiler | 550 N |
| GS4 III / Max | Latest generation, taller opening | 560 N |
| GS4 Plus | Extended body, wider lid and glass area | 545 N |
If the vehicle has been facelifted in-market, send us a photo of the hinge and the lid edge; we will confirm the reference before the order ships.
| Item | GS4 Plus Value |
|---|---|
| Actuator force | 545 N per side |
| Stroke | 350 mm |
| Door mass supported | Up to 42 kg |
| Power | 12V DC, 15A fused |
| Open / close time | 6.5 s / 7 s |
| Water protection | IPX5 | Noise: under 56 dB |
| Cycle test | 42,000 operations |
| Warranty | 24 months |
Handed brackets on factory hinge points, harness along the Plus hatch loom through the original grommet, module behind the rear quarter trim. Bracket bolts at 22 Nm. About two hours for a first car; the manual includes the self-learn sequence and a fault table.
Carton 84 x 24 x 20 cm, one set per carton, five cartons per master. Actuators in EPE sleeves, hardware bagged by side, module in a rigid insert. We hold GS4 family actuators in rolling stock and label cartons with the body code so distributors can keep the five references apart on the shelf.