The Haval H2 is one of the most widely exported compact SUVs from the Great Wall line, with strong populations in Russia, Chile, Peru, Ecuador, Iran and West Africa. Almost every unit shipped with a manual tail door and a pair of gas struts, and those struts lose pressure after a few winters, so the door starts to sag or drop on the owner's shoulder. This retrofit replaces them with motorised actuators plus a control module, giving the rear door electric open and close at the touch of the original key, while keeping every factory mounting point.

Because the H2 rear door is lighter than the larger Haval bodies, the actuators run a lower force curve and a slower final travel, so the door settles onto the seal instead of bouncing. The kit is supplied pre assembled and tested, and the harness uses matching plugs for the factory connector, with no cutting into the vehicle wiring at any stage.

What the kit changes for the driver

Fitment and kit contents

Technical data

Fitting sequence

• Support the tail door, then release both original gas struts from their ball studs and set them aside.
• Mount the brackets supplied with the kit and fit the motorised struts in the same position and orientation.
• Feed the harness through the tail gate grommet along the factory loom and connect the module.
• Wire the cabin button, store the opening height, then run the door twice and confirm the obstacle reverse works.

Packing, warranty and supply

Two struts sit in foam end caps inside a neutral carton of 82x23x21 cm, two sets to a master carton, with fasteners bagged by mounting position and a printed guide in English, Spanish or Russian. Each set is load tested on the bench for force curve, current draw and obstacle reverse before sealing. Private label printing, custom part numbers and translated manuals are available for distributors, and replacement struts or modules ship from stock so warranty claims are settled in days. Warranty runs 24 months against manufacturing defects.

Request the current wholesale band and loading schedule for the Haval H2 kit, and we will reply within one working day with the specification sheet and packing list.