GREAT WALL HAVAL JOLION · REMOTE CONTROL TAIL DOOR LIFT RETROFIT
The Haval Jolion is a compact SUV with a tall rear boot that sits high off the ground, so pulling it shut by hand is awkward for shorter drivers and impossible with an armful of shopping. This electric trunk drive boot opener solves that: the two original gas struts are exchanged for motorised lift units, a control box is added behind the trim, and the tail door opens and closes from the key remote, the boot button or a switch in the cabin. All work happens on existing mounting points, so no holes are drilled and the factory latch and lock remain in service.
The actuator force is calibrated for the lighter Jolion hatch, which keeps the motion smooth instead of fast and jerky, and the bracket set follows the curve of this specific body so the door sits square when closed.
A Hall sensor reads strut load and reverses the door the moment an obstacle touches the closing edge, so children, pets and luggage are never trapped. The module only allows powered travel when the vehicle is in park, which prevents the boot from opening while driving. Motor current is limited to protect the gear set, an inline fuse isolates the retrofit circuit from the car's harness, and the whole system simply returns to manual use if power is lost.
| Parameter | Value |
|---|---|
| Application | Haval Jolion (Great Wall) rear boot |
| Actuator | Motorised boot lift struts, set of 2 |
| Rated force | 580 N per strut |
| Voltage | 12V DC |
| Opening time | About 7 seconds |
| Control | Remote key, boot button, cabin switch |
| Protection | Anti pinch reverse, park interlock, fuse |
| Bracket | Zinc plated steel with powder coat |
| Temperature | -30°C to +75°C |
| Cycle life | 45,000 open and close cycles |
| Warranty | 24 months |
A wiring diagram and photo instructions are packed with every set, and our engineers can join a video call to guide a first installation.
Each set ships in a printed carton with EPE foam protecting the struts, and fastener bags are marked for position. Units are bench tested for motor current, harness continuity and pinch guard response before packing. Distributors may order neutral packing, private label printing, custom part numbers and translated manuals, and we keep struts, modules and switches in stock so replacement parts leave the warehouse without waiting for a production run.
Send the model year or VIN and we will confirm Jolion fitment, the wholesale price band and the next shipment date within one working day.