BGD 235/238 ISO 2719 Basic Flash Point Tester

1.Description

The concentration of vapors volatilized from the surface of flammable and combustible liquids (including solids with sublimation properties) increases as the temperature of the apparatus rises. These vapors form a gas mixture with air. When the mixture of vapors reaches a certain concentration, if in contact with an ignition source, it will produce a flash of instantaneous combustion, a phenomenon known as flash ignition. The lowest solid temperature at which flash ignition occurs is called the flash point.
Determination of the flash point of the method of open cup method and closed cup method two, open cup method of flash point is higher than the closed cup method 15 ~ 25 ºC, the flash point of the molecular composition of the oil and the oil surface pressure related to the pressure is high, high pressure, high flash point. Flash point is an important indicator to prevent oil from fire. In the open container, the heating temperature of the oil should be lower than the flash point of 10 ºC; in the pressure vessel heating is not this limit.
The flash point of a chemical product is an important pointer to characterize the safety performance of the product under the conditions of use, storage, transportation, etc. Therefore, it is very necessary for many coating manufacturers to know the flash point of their products.
BGD company provides a series of flash point tester using patented technology, the use of combustible liquids through the control of a certain flow rate to make it burn and to ensure that the fire is stable and adjustable in size, this way to avoid electronic ignition and liquefied petroleum gas ignition brought about by the danger and inconvenience.

Feature:
* Liquid crystal display, clear and beautiful.
* Adopt light touch button to manually adjust the heating speed, easy to operate.
* Small size, light weight and reasonable structure.

2.Technical Parameter