I. Introduction to Plasma

1.1 Equipment Principle

The equipment utilizes a high-frequency, high-voltage electric field to ionize gas at atmospheric pressure, generating low-temperature plasma. Through physical bombardment and chemical reactions, the material surface is modified, thereby achieving cleaning, activation, and etching effects without altering the intrinsic properties of the material.

II. Product Introduction

2.1 Product Overview

This plasma surface treatment machine is independently developed and manufactured by our company. It provides stable and long-lasting treatment results. A professional team provides one-on-one guidance, the equipment is easy to operate, and the control and maintenance costs are low, helping enterprises reduce costs, increase efficiency, and improve productivity.

2.2 Equipment Advantages

Air pressure upper and lower limit alarms

Features over-temperature protection, overload protection, short circuit protection, open circuit protection, and leakage protection.

2.3 Product Structure Components

The plasma surface treatment machine structure consists of a high-voltage power generator and a plasma generator spray gun.

III. Equipment Operation

3.1 Alarm Information

1. Air pressure upper limit detection abnormal alarm (detects the upper limit alarm signal from the digital pressure gauge)

2. Air pressure lower limit detection abnormal alarm (detects the lower limit alarm signal from the digital pressure gauge)

If the customer's site does not have a ground wire connected according to electrical safety regulations, the system will detect and prompt an abnormal grounding signal. The equipment can only be used after the abnormality is resolved. Connecting to the wall or floor is considered a false ground wire and does not comply with electrical safety regulations. Electrostatic induction cannot be completely eliminated, and it can also damage the motherboard. The solution is as follows:

1. Check if the main switch's yellow-green ground wire is connected to the power outlet. The connected power strip also needs to have a ground wire;

2. Disabling the grounding alarm function is not recommended, because the high voltage of the anode output from the plasma generator and the internal ground wire of the equipment create a circuit, resulting in a hot ground state. The metal parts of the equipment will be live during operation and should not be touched!

Plasma Surface Treatment Machine Laboratory Plasma Surface Processor Vacuum Plasma Surface Processing Equipment