N 526E02 KNX Switch Dim Actuator 8x AC 230V 16A 1-10V DIN Rail Relay UL Standard 5WG1526-1EB02
This KNX switch/dimming actuator controls eight independent lighting channels for AC 230 V, 50/60 Hz applications and is UL standard certified. Each channel provides a 16 A relay switching output at power factor 1 and a 1...10 V DC control voltage output for dimming compatible electronic control gears and LED drivers.
Key Features
Controls eight independent lighting channels for AC 230 V, 50/60 Hz applications
UL standard certified
Each channel provides a 16 A relay switching output at power factor 1
1...10 V DC control voltage output for dimming compatible electronic control gears and LED drivers
Supports minimum 30 dynamic ECGs for 58 W fluorescent lamps per channel
Slide switches on each relay output allow local manual operation and switch position indication
Red LED shows addressing mode and operational readiness
Each channel offers one 1-bit switching object and one 8-bit dimming value/status object for individual on/off, dimming brighter or darker and set value control
Integrated 8-bit scene control for up to 8 scenes per output
Bus-powered electronics and an integrated bus coupling unit eliminate the need for an auxiliary supply
Mounts on a TH35 DIN rail according to EN 60715, with an 8-module width and IP20 protection
24-month warranty
Configurable Features
Adjustable on/off delay
Night mode base lighting
Warning dimming to 50% before switch-off
Configurable dimming value at switch-on
Status objects can be transmitted on request, cyclically or automatically after changes
Applications
Large commercial lighting panels
Offices
Retail spaces
Hotels
Educational facilities
Suitable for scenarios where eight switched and dimmed channels must be controlled over a single KNX device
Product tags
Send your message to this supplier
Send Now
Submission successful!
N 526E02 KNX Switch Dim Actuator 8x AC 230V 16A 1-10V DIN Rail Relay UL Standard 5WG1526-1EB02