Overview of the machine:
Powder Fill Filling High-Tech Pharmaceutical Machine
Technical parameters:
Output | 400Capsules/min |
No.of segment bores36 | 3 |
Suitable fof capsule | 00#-5# |
Total power | 4Kw(Standard configuration) |
Overall weight90 | 900Kgs |
Overall diemensions | 760(+304)mm*780mm(+304)*1900mm |
Noise | ≤75DB(A) |
Pressure | 0.4 ~ 0.7Mpa |
Air consumption | ≤6m³ |
Vacuum | -0.03 ~ -0.06Mpa |
Filling error | ±2.5%~±5% |
The machine may make technical improvements without prior notice, and the attached picture shows the options that may be offered.
Three-dimensional adjustment mechanism:
Copper collar:
![]() | 1.Hard column: stable particle weight, loading amount close to the maximum value, one or two groups of filling rods have obvious beating, the adjustment range is too small, the machine load is large, the corresponding parts wear fast. 2.Soft column: stable grain weight, large adjustment range, small load, small wear of parts. Half column: sometimes appear puff powder particle weight and light. 3.Scattered sand: leakage, dirty machine table, installation difference. The gap type copper ring can be replaced with the sealing type. |
![]() | According to the material situation, the company provides the optional replacement copper ring |