General Information
| Parameter Name |
Value |
| Product Series |
IMC-101 Series Industrial Ethernet-to-Fiber Media Converter |
| Order Number |
IMC-101-M-ST |
| Product Description |
10/100BaseT(X) to 100BaseFX multi-mode fiber converter with ST connector, 0 to 60°C operating temperature, non-hazardous location model |
| Product Status |
Current Product |
| Conversion Type |
Ethernet Copper to Fiber Optic |
Ethernet Interface (Copper)
| Parameter Name |
Value |
| Port Type |
1 x 10/100BaseT(X) (RJ45 connector) |
| Auto-negotiation |
Yes (supports 10/100 Mbps, half/full duplex) |
| Auto-MDI/MDI-X |
Yes |
| Cable Type |
Category 5e or better UTP cable (max 100 m) |
Ethernet Interface (Fiber)
| Parameter Name |
Value |
| Port Type |
1 x 100BaseFX (ST connector) |
| Fiber Type |
Multi-mode (MM) |
| Wavelength |
850 nm |
| Transmission Distance |
Up to 5 km |
| Cable Type |
62.5/125 μm or 50/125 μm multi-mode fiber optic cable |
Key Features
| Parameter Name |
Value |
| Link Fault Pass-Through (LFPT) |
Yes |
| Alarm Function |
Power failure and port break alarm via relay output |
| Redundant Power Inputs |
Yes (dual DC inputs) |
| Operating Mode |
Store-and-forward and pass-through mode |
| DIP Switch Settings |
Link Fault Pass-Through (enable/disable), Port Status Alarm (enable/disable) |
Power Specifications
| Parameter Name |
Value |
| Input Voltage Range |
12 to 45 VDC |
| Input Current |
200 mA @ 12-45 VDC (0.16 A @ 24 VDC typical) |
| Power Connector |
Removable terminal block (2-pin for each power input) |
| Overload Protection |
1.1 A current limit |
| Reverse Polarity Protection |
Yes |
| Power Consumption |
Approx. 4.8 W (24 VDC @ 0.2 A) |
Physical Characteristics
| Parameter Name |
Value |
| Housing Material |
Aluminum case |
| Protection Class |
IP30 |
| Dimensions (W x H x D) |
53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in) |
| Net Weight |
0.63 kg (1.39 lb) |
| Installation Options |
DIN rail mounting (TS-35/7.5 or TS-35/15), Wall mounting |
Environmental Conditions
| Parameter Name |
Value |
| Operating Temperature Range |
0 to 60°C (32 to 140°F) |
| Storage Temperature Range |
-40 to 85°C (-40 to 185°F) |
| Relative Humidity |
5 to 95% RH (non-condensing) |
| Altitude |
Up to 2000 m above sea level |
EMI/EMC Compliance
| Parameter Name |
Value |
| IEC 61000-4-2 (ESD) |
Contact: 6 kV; Air: 8 kV |
| IEC 61000-4-3 (RS) |
80 MHz to 1 GHz: 10 V/m |
| IEC 61000-4-4 (EFT) |
Power lines: 2 kV; Signal lines: 1 kV |
| IEC 61000-4-5 (Surge) |
Power lines: 2 kV (line to line), 4 kV (line to ground); Signal lines: 1 kV |
| FCC Part 15 |
Class A |
| CE Mark |
Yes |
Safety Certifications
| Parameter Name |
Value |
| UL Certification |
Yes (UL 61010-1) |
| CSA Certification |
Yes (CSA C22.2 No. 61010-1) |
| ATEX/IECEx Certification |
No (standard model, non-hazardous location) |
Mechanical Data