MachineU > China Products > Home Appliance
Electronic Inductor GLE GCNR6045-6R8MC Magnetic Powder Component with Polyurethane Coated Copper Wire
Electronic Inductor GLE GCNR6045-6R8MC Magnetic Powder Component with Polyurethane Coated Copper Wire
Specifications
Description :
SMD,6x6mm Fixed Inductors RoHS
Mfr. Part # :
GCNR6045-6R8MC
Model Number :
GCNR6045-6R8MC
Package :
SMD,6x6mm
Description

Product Overview

The GCNR6045 GLE is a magnetic component designed for electronic applications. It is manufactured by Shenzhen Glorious Electronic Co.,Ltd. and is RoHS compliant.

Product Attributes

  • Brand: GLE
  • Origin: China (Magnetic powder, Magnetic epoxy resin, Electrode), Germany (Wire)
  • Material: Nickel zinc ferrite magnetic powder, Polyurethane-system coated copper wire, Magnetic epoxy resin, Tin
  • Color: Black printing
  • Certifications: RoHS Comp.

Technical Specifications

TypePart NO. Inductance Lo (uH) Test Frequency (Hz/v) DC Resistance (m)30% Isat (A) Max. L/L-35% Irms (A) Max. T40Inductance Tolerance
GCNR6045GCNR6045-2R2M2.2100KHz/1v216.004.00M = 20%
GCNR6045GCNR6045-3R3M3.3100KHz/1v235.203.00M = 20%
GCNR6045GCNR6045-4R7M4.7100KHz/1v254.003.00M = 20%
GCNR6045GCNR6045-6R8M6.8100KHz/1v403.803.00M = 20%
GCNR6045GCNR6045-100M10100KHz/1v473.002.50M = 20%
GCNR6045GCNR6045-150M15100KHz/1v772.302.00M = 20%
GCNR6045GCNR6045-220M22100KHz/1v1151.901.80M = 20%
GCNR6045GCNR6045-330M33100KHz/1v1451.501.45M = 20%
GCNR6045GCNR6045-470M47100KHz/1v2201.301.25M = 20%
GCNR6045GCNR6045-680M68100KHz/1v3301.000.90M = 20%
GCNR6045GCNR6045-101M100100KHz/1v5000.800.70M = 20%

General Specifications

ItemSpecificationCondition
Terminal StrengthNo electrode detachment should be foundWhen the device is pushed in two directions of X and Z with the force of 5N for 102seconds after soldering between copper plate and the electrodes
Reflow testChange from an initial value L : within20%Peak temp 2405 3010s. The specimen shall be subjected to the reflow process under the above condition 2 times.Test board shall be 0.8mm thick. Base material shall be glass epoxy resin. Measurement: The specimen shall be stored at standard atmospheric conditions for 1 h in prior to the measurement.
VibrationChange from an initial value L : within20%The specimen shall be subjected to a vibration of 1.5mm amplitude, sweep frequency 10~55~10Hz after vibration for 1 hours
Free fall testChange from an initial value L : within20%The specimen must be fixed on test board. Then it shall be fallen freely from 1m height. 10 consecutive times.
High temperature and high humidity testChange from an initial value L : within20%The specimen shall be stored at a temperature of 402 with relative humidity of 90 ~ 95% for 96 4h. Then it shall be stabilized under standard atmospheric conditions for 1 h before measurement. Measurement shall be made within 1h~ 2h.
High temperature preservation testChange from an initial value L : within20%The specimen shall be stored at a temperature of 1252for 96 1h. Then it shall be stabilized under standard atmospheric conditions for 1 h before measurement. Measurement shall be made within 1h~ 2h.
Low temperature preservation testChange from an initial value L : within20%After stored at a temperature of -40 3 for 96 1h. The specimen should be measured,then it should be measured under normal temperature and humidity in 1h~ 2h hours.
Solder ability test95 Terminals shall be immersed in flux at room temperature. Dip sample into solder bath containing molten solder at 2605for 30.5 seconds.
Cold and hot cycle testChange from an initial value L : within20%The specimen shall be measured afcer to 20 continuous cycles of temperature change of -403for 30 min and 1252 for 30 min with the transit period of 2min or less. Then it shall be stabilized under standard atmospheric conditions for 1 h before measurement. Measurement shall be made within 1h~ 2h.
Storage temperature and humidity rangetemperature range 535 humidity range 25%80%In packing state.

Standard Atmospheric Conditions

Unless otherwise specified, the standard range of atmospheric conditions in making measurements and test as follows; Ambient temperature : 5to 35, Relative humidity: 45% to 85%, Air pressure: 86kPa to 106kPa. If more strict measurement is required, measurement shall be made within following limits; Ambient temperature : 202, Relative humidity: 655%, Air pressure: 86kPa to 106kPa.

Reflow Soldering Condition

  • Reflow times: 2times max
  • We recommend infrared ray as heat source of reflow bath. However halogen lamp shall be used, side heat will be beyond range of resistance heat, so we can't recommend it.

Recommended PCB Pattern

(Dimensions in mm)

Packing Specifications

Tape Dimensions

ABCDEFGH
16.07.501.7512.04.002.001.500.40

Taping Method

Cold Seal (The direction shall be seen from the top cover tape side.)

Reel Dimensions

ABCDEF
330.013.021.020.410016.4

Packing Box

  • Packing case material: Kraft paper
  • Real quantity per packing box: 3 reels / 1 box
  • Quantity per reel: 1000 PCS / reel
  • Marking: Customer's part number, Quantity, Lot number.

Prohibited Substances

RoHS Regulated Substances

  1. Lead and its compounds
  2. Mercury and its inorganic compounds
  3. Cadmium and its compounds
  4. Hexavalent chromium compounds
  5. Polybrominated biphenyls (PBB)
  6. Polybrominated diphenyl ethers (PBDE)

Prohibition to Use Ozone Depleting Substances (ODS)

  1. Chlorofluorocarbons (CFCs)
  2. Halons
  3. Carbon tetrachloride
  4. Trichloroethane (Methyl chloroform)

We confirm that our products and our production process accord with "rule of RoHS&HF". All materials used in this product are registered material under Regulation of Manufacture of Chemical Substances.


2410121507_GLE-GCNR6045-6R8MC_C439387.pdf

Send your message to this supplier
Send Now

Electronic Inductor GLE GCNR6045-6R8MC Magnetic Powder Component with Polyurethane Coated Copper Wire

Ask Latest Price
Product Detail
Description :
SMD,6x6mm Fixed Inductors RoHS
Mfr. Part # :
GCNR6045-6R8MC
Model Number :
GCNR6045-6R8MC
Package :
SMD,6x6mm
Contact Supplier
Electronic Inductor GLE GCNR6045-6R8MC Magnetic Powder Component with Polyurethane Coated Copper Wire

Beijing Silk Road Enterprise Management Services Co., Ltd.

Verified Supplier
1 Years
beijing, beijing
Since 2009
Business Type :
Manufacturer, Distributor/Wholesaler, Agent, Importer
Main Products :
Crystals, Delay Lines, Aluminum - Polymer Capacitors
Employee Number :
>>300
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Fixed Inductors
MachineU China Products Home Appliance
Contact Supplier
Submit Requirement