Product Overview

The FXCMXXXXF-Series and FXCMXXXXCF-Series Wire Wound Chip Common Mode Choke from SZ CJIANG TECHNOLOGY CO., LTD are designed for general electronics equipment. These common mode line filters are engineered to suppress common mode noise effectively. They offer a wide operating temperature range and are available in various sizes and impedance values to suit diverse application needs.

Product Attributes

• Brand: CJIANG
• Origin: Shenzhen, China
• Product Type: Wire Wound Chip Common Mode Choke
• Series: FXCMXXXXF-Series, FXCMXXXXCF-Series
• Intended Use: General electronics equipment

Technical Specifications

General Electrical Characteristics:

• Rated Current: Temperature rise 40C TYP
• Operating Temperature: -40C to +125C

Product Identification Example: FXCM4520F-900T

• (1) Series: FXCM
• (2) Dimensions (L*H*W)
• (3) Type
• (4) Impedance (e.g., 900=90, 901=900, 902=9000)
• (5) Packing: REEL

Dimensions:

FXCM4520F Series Specifications:

FXCM7060F Series Specifications:

FXCM9070F Series Specifications:

FXCM1211F Series Specifications:

FXCM1513CF Series Specifications:

Reliability Testing:

• Operating Temperature: -40 to +125
• Appearance Inspection: No external defects by visual inspection.
• Terminal Strength: After soldering, between copper plate and terminals of coils, push in two directions of X, Y with standing 10N (1.02kg) for 10+/-2 sec. Terminal should not peel off.
• Heat endurance of reflow soldering: Refer to IR Reflow profile.
• Insulating resistance: Over 100 M at 100V D.C. between wire and core.
• Dielectric Strength: Apply at 0.5KV 3mA for 1 minute between wire and core.
• Temperature characteristics: Inductance coefficient (0~2,000) 10 / (-40~ +125 ).
• Humidity characteristics: Inductance deviation within 10%, after 96 hours in 90~95% relative humidity at 40 2 and 1 hours drying under normal condition. A test is made under the above mentioned condition, and it is kept for 2 hours in the normal condition. After that, no mechanical and electrical defect should be found.

Material List:

Packing Specifications:

• Tape width: 24 mm
• Distance: 16 mm
• Pull-of force: 10~120g
• Reel: 13' (Diameter 330mm)
• PE bag, Inner box, Outer box (fill insufficient boxes with inner boxes or padding).
• Label

Packing Quantity Coefficients:

Note: FXCM4520F series reel diameter is 178mm, other series are 330mm.

Disclaimer: Products are developed, designed, and intended for use in general electronics equipment. They are not designed or warranted to meet the requirements of applications demanding especially high reliability, or where failure might directly cause damage to society, person, or property. Contact CJIANG TECHNOLOGY CO., LTD for details if intending to use in applications such as aircraft, aerospace, undersea, nuclear control, , power plant, medical, transportation, traffic signal, disaster prevention/crime prevention, data-processing, or similar complexity/reliability requirements.