MachineU > China Products > Home Appliance
GF Series Aluminum Electrolytic Capacitor Featuring Econd 1000UF25VG200GF 1000uF 25V for Electronics
GF Series Aluminum Electrolytic Capacitor Featuring Econd 1000UF25VG200GF 1000uF 25V for Electronics
Specifications
Lifetime :
3000hrs@105℃
Operating Temperature :
-40℃~+105℃
Capacitance :
1000uF
Height - Seated (Max) :
20mm
Voltage Rating :
25V
Pin Spacing :
5mm
Diameter :
10mm
Equivalent Series Resistance(ESR) :
40mΩ
Ripple Current :
1.65A@100KHz
Tolerance :
±20%
Description :
1000uF 25V Aluminum Electrolytic Capacitors Through Hole,D10xL20mm 3000hrs@105℃
Mfr. Part # :
1000UF25VG200GF
Model Number :
1000UF25VG200GF
Package :
Through Hole,D10xL20mm
Description

Aluminum Electrolytic Capacitor - GF Series

This product is an aluminum electrolytic capacitor from the GF series, designed for various electronic applications. It offers reliable performance and durability.

Product Attributes

  • Brand: MILANG ELECTRONICS CO.,LTD
  • Origin: Hubei, China
  • Series: GF
  • Sleeve Material: Green PET with white lettering
  • RoHS Compliant: Yes

Technical Specifications

Supplier PN Series Capacitance (uF) Rated Voltage (V) Size (D x L) mm Tolerance Dissipation Factor (D.F.) / 120Hz (%) Leakage Current (uA) / 60s Impedance / 100KHz () Life (Hrs) Ripple Current (mA) / 100KHz Surge Voltage (V) Working Temperature (C)
1000UF25VG200GF GF 1000.0 25.0 10.0 X 20.0 -20% ~ +20% 10.0 250.0 0.04 3000 1650.0 32.0 -40 ~ +105

Dimensions (mm)

D L F d
10.0 0.5 20.0 1.5 5.0 0.5 0.6 0.05

Marking

Item Description
1 Logo
2 Capacitance and Rated Voltage
3 Polarity bar
4 Series
5 Operating Temperature Range and Capacitance Tolerance
6 RoHS
7 Production Date (e.g., 2502 for Feb 2025)
8 Sleeve Material

Reliability Tests

Test Item Conditions Specifications
Maximum permissible ripple current Temperature: 1052, Ripple frequency: 100KHz Refer to table
Surge Temperature: 1052, Applied voltage: see specification, Duration: 1000 cycles 1. No electrical or mechanical damage. 2. Capacitance change within 15%. 3. D.F. smaller than specification value. 4. Leakage current smaller than specification value.
Temperature Cycle One Cycle: Rated high category temperature3 (303 min), 25 (3 MAX min); Rated low category temperature3 (303 min), 25 (3 MAX min). Total number of cycles: 5 1. No appearance defect. 2. Capacitance change within 5%. 3. D.F. smaller than specification value. 4. Leakage current smaller than specification value.
Resistance to Soldering Heat Warm up time: 1202 seconds to reach 1202, Solder bath temperature: 2605, Immersion depth: 1.5 to 2.0mm, Immersion duration: 101 seconds 1. No appearance defect. 2. Capacitance change within 5%. 3. D.F. smaller than specification value. 4. Leakage current smaller than specification value.
Solder Ability Solder bath temperature: 2355, Immersion depth: 1.5 to 2.0mm, Immersion duration: 101 seconds A minimum of 95% the immersed surface is to be coated with the new solder
Low Temperature Characteristics (Max. Impedance Ratio) Working Voltage (V): 6.3, 10, 16, 25, 35, 50, 63, 100 Impedance Z-40/+20: 8, 6, 4, 3, 3, 3, 3, 3
High Humidity Storage Temperature: 402, Relative humidity: 90 to 95%, Duration: 2408 hours 1. No electrical or mechanical damage. 2. Capacitance change within 15%. 3. D.F. smaller than specification value. 4. Leakage current smaller than specification value.
Vent Applied current: 1A (Less than 22.4mm), 10A (More than 22.5mm) There shall be no explosion, flash, flame, spark or fire from the capacitor during or after the test, nor shall there be expulsion of any metal from the casing.
Terminal strength: Tensile test intensity/winding intensity Tensile test: Diameter of terminal 0.5d0.8 (10N, 101sec); 0.8d1.25 (20N, 101sec). Winding test: Diameter of terminal 0.5d0.8 (5N, Awl quality 0.51kg); 0.8d1.25 (10N, Awl quality 1.02kg) 1. No electrical or mechanical damage. 2. No appearance damage.
Vibration Frequency range: 10 Hz to 55 Hz, Amplitude: 1.5 mm, Cycle duration: 1 minute, Duration: 2 hours per direction (3 directions) 1. No electrical or mechanical damage. 2. No appearance damage.
Endurance Capacitors are placed in an oven and applied voltage for 3000 hours at 105. After being restored to 25, capacitors shall meet the specifications. 1. Capacitance change within 20% of the initial value. 2. D.F. change within 200% of the specified value. 3. Leakage current smaller than specification value.
Shelf Life Capacitors are placed in an oven for 1000 hours at 105 without applying rated working voltage. After being restored to 25, capacitors shall meet the specifications. 1. Capacitance change within 20% of the initial value. 2. D.F. change within 200% of the specified value. 3. Leakage current within 200% of the specification value.

Packing

Type Details
Bulk Packing Outer box dimensions (L x W x H): 420x327x270mm
Taped Packing 10 inner boxes per outer box. Inner box dimensions (L x W x H): 345x235x55mm. Outer box dimensions (L x W x H): 490x355x295mm
Tray Packing N/A

Storage Conditions

  • Storage Temperature: 35
  • Storage Humidity: 75% RH
  • Shelf Life: One year (re-charging required after one year)

2504101957_Econd-1000UF25VG200GF_C46867075.pdf

Send your message to this supplier
Send Now

GF Series Aluminum Electrolytic Capacitor Featuring Econd 1000UF25VG200GF 1000uF 25V for Electronics

Ask Latest Price
Product Detail
Lifetime :
3000hrs@105℃
Operating Temperature :
-40℃~+105℃
Capacitance :
1000uF
Height - Seated (Max) :
20mm
Voltage Rating :
25V
Pin Spacing :
5mm
Contact Supplier
GF Series Aluminum Electrolytic Capacitor Featuring Econd 1000UF25VG200GF 1000uF 25V for Electronics

Beijing Silk Road Enterprise Management Services Co., Ltd.

Verified Supplier
1 Years
beijing, beijing
Since 2009
Business Type :
Manufacturer, Distributor/Wholesaler, Agent, Importer
Main Products :
Crystals, Delay Lines, Aluminum - Polymer Capacitors
Employee Number :
>>300
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Aluminum Electrolytic Capacitors
MachineU China Products Home Appliance
Contact Supplier
Submit Requirement