The LPM series of polar Aluminum electrolytic capacitors from Jiang Xi Lian Sheng Electronic CO.,LTD. are designed for electronic equipment applications. These capacitors are compliant with ROHS directive (2002/95/EC) and meet IEC60384 standards. They offer a wide operating temperature range of -55C to +105C and a rated voltage range from 6.3V to 450V. Key features include a capacitance tolerance of -20% to +20%, and a load life of 2000 hours at 105C. They are suitable for applications requiring reliable performance and durability.
| Part Description | LIAN SHENG (P/N) | Series | Rated Voltage (V) | Capacitance (uF) | Capacitance Tolerance (%) | Case Size (mm) | Dissipation Factor Max (%) | Leakage Current (uA) 2min | Category Temperature Range (C) | Load Life (105C) |
|---|---|---|---|---|---|---|---|---|---|---|
| Polar Aluminum electrolytic capacitor | R00LPM1E470D011M00 | LPM | 25 | 47 | -20+20 | 5*11 | 14 | 35.25 | -55+105 | 2000H |
| General Specifications | ||||||||||
| Operating Temperature Range | -55~+105 | |||||||||
| Rated Working Voltage Range | 6.3V~450V | |||||||||
| Capacitance Tolerance | -20%+20% (M) | |||||||||
| Dissipation Factor (MAX) (20, 120Hz) | UR(V) | tg | ||||||||
| 6.3 | 0.24 | |||||||||
| 10 | 0.20 | |||||||||
| 16 | 0.16 | |||||||||
| 25 | 0.14 | |||||||||
| 35 | 0.12 | |||||||||
| 50 | 0.10 | |||||||||
| 63~100 | 0.08 | |||||||||
| 160~350 | 0.20 | |||||||||
| 400~450 | 0.25 | |||||||||
| Leakage Current (MAX) (at 20 after 2 minutes) | 6.3~100V: I0.03CV or 4uA (whichever is greater) | |||||||||
| 160~450V: CV1000: I0.03CV +40uA (whichever is greater) | ||||||||||
| CV>1000: I0.04CV +100uA (whichever is greater) | ||||||||||
| Mechanical Characteristics | ||||||||||
| Lead Strength (Tensile) | Wire lead: d(mm) 0.45 (0.5kg), 0.50.8 (1.0kg), 0.8d1.25 (2.0kg); Snap-in terminal: 2.0kg | |||||||||
| Lead Strength (Bending) | Wire lead: d(mm) 0.45 (0.25kg), 0.50.8 (0.5kg), 0.8d1.25 (1.0kg); Snap-in terminal: Area(m) 0.5S1 (1.0kg), S>1 (2.5kg) | |||||||||
| Vibration Resistance | Frequency 10-55Hz, Amplitude 1.5mm, 3 directions for 2 hours each. Capacitance change: 5% of initial. | |||||||||
| Solder Ability | Dipped in solder at 260C 5C for 20.5 seconds. Solder coverage 95%. | |||||||||
| Reliability | ||||||||||
| Load Life (105C) | 2000 hours. Capacitance change: 25% of initial. DF: 200% of initial. Leakage current: initial specified value. | |||||||||
| Shelf Life (105C) | 1000 hours. Capacitance change: 25% of initial. DF: 200% of initial. Leakage current: 200% of initial. | |||||||||
| Damp Heat (Steady State) | 40C2, 90%-95% RH for 2408 hours. Capacitance change: 5% of initial. DF: specified value. Leakage current: specified value. | |||||||||
| Storage at Low Temperature (-25C) | 964 hours. Capacitance change: 20% of initial. DF: specified value. Leakage current: specified value. Appearance: no abnormal. | |||||||||
| Surge Test | Rated surge voltage applied for 305 sec, repeated for 1000 cycles. Capacitance change: 20% of initial. DF: <200% of initial. Leakage current: initial specified value. | |||||||||
| Pressure Relief (Explosion Proof) | AC Test: Voltage 0.7*rated DC or 250V AC (lower). DC Test: Specific current applied while applying inverse voltage. Pressure relief device shall operate. | |||||||||
| Rated Voltage (RV) and Surge Voltage (SV) | RV (V) | SV (V) | ||||||||
| 6.3 | 8 | |||||||||
| 10 | 13 | |||||||||
| 16 | 20 | |||||||||
| 25 | 32 | |||||||||
| 35 | 44 | |||||||||
| 50 | 63 | |||||||||
| 63 | 79 | |||||||||
| 80 | 100 | |||||||||
| 100 | 125 | |||||||||
| 160 | 200 | |||||||||
| 200 | 250 | |||||||||
| 250 | 300 | |||||||||
| 350 | 400 | |||||||||
| 400 | 450 | |||||||||
| 450 | 500 | |||||||||