Fusible Wire Wound Resistors, Flameproof (FSQ Series) are designed for reliable performance in consumer electronics, computers, telecommunications, and control instruments. These resistors offer flameproof characteristics and are RoHS compliant.
| Type | Rated Wattage | Nominal Resistance | Tolerance | Special Wire | Lead Length | Dimensions (L1.5 x H1 x W1) | Lead Diameter (d0.1) | Resistance Range | Dielectric Withstanding Voltage | Operating Temperature Range | Terminal Tensile Load | Twist Withstand | Resistance Temperature Coefficient | Temperature Cycle Resistance Change | Short Time Overload Resistance Change | Insulation Resistance | Voltage Withstanding | Load Life Resistance Change | Moisture-proof Load Life Resistance Change | Solder-ability | Resistance to Soldering Heat Resistance Change | Nonflammability | Fusing Characteristics (16x Rated Wattage) | Fusing Characteristics (32x Rated Wattage) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FSQ | 2W | 5 (e.g., 5R) | J (5%) | B | B1 | 18 x 7 x 7 mm | 0.65 mm | 5 | 1000V | -55150 | 4.5kgs | 2 times without looseness/break | 300ppm/ | 1% | 2% | >1000M | AC 1000V for 1 min | 5% | 5% | >95% coverage | 1% | Shall not get flame | Fusing within 60 sec | Fusing within 15 sec |