This document details the specifications for an mSATA Connector, likely used in computing and storage applications. It provides material, finish, and soldering capabilities, along with detailed signal assignments for both PCI-e Mini Card and mSATA interfaces. The connector is designed to be reflow solder capable.
| Pin | PCI-e Mini Card Signal | mSATA Signal |
|---|---|---|
| 51 | Reserved | +3.3Vaux Presence |
| 52 | +3.3Vaux Presence | Reserved |
| 49 | Reserved | GND |
| 50 | GND | GND |
| 47 | Reserved | +15V |
| 48 | +15V | +1.5V |
| 45 | Reserved | LED_WP |
| 46 | LED_WP | Vendor |
| 43 | Reserved | GND |
| 44 | GND | LED_WLAN |
| 41 | Reserved | +3.3V |
| 42 | +3.3V | Reserved |
| 39 | +3.3Vaux | GND |
| 40 | GND | GND |
| 37 | GND | USB_D+ |
| 38 | USB_D+ | Reserved |
| 35 | GND | USB_D- |
| 36 | USB_D- | Reserved |
| 33 | PET0_ | GND |
| 34 | GND | Reserved |
| 31 | PETn0 | +3.3Vaux |
| 32 | SMB_DATA | GND |
| 29 | +3.3Vaux | +1.5V |
| 30 | GND | +1.5V |
| 27 | GND | SMB_CLK |
| 28 | +1.5V | Two Wire Interface |
| 25 | PERp0 | GND |
| 26 | GND | Two Wire Interface |
| 23 | V3.5V | +3.3Vaux |
| 24 | +3.3Vaux | GND |
| 21 | GND | Reserved |
| 22 | Reserved | Reserved |
| 19 | UM_CE# | +3.3V |
| 20 | WDO_ISABLER | Reserved |
| 17 | Reserved | GND |
| 18 | GND | Reserved |
| 15 | UM_VPP | GND |
| 16 | GND | Reserved |
| 13 | UM_RESET# | Reserved |
| 14 | Reserved | Reserved |
| 11 | UM_CLK | Reserved |
| 12 | Reserved | Reserved |
| 9 | UM_DATA | Reserved |
| 10 | Reserved | Reserved |
| 7 | UM_PWR | GND |
| 8 | GND | Reserved |
| 5 | COEX2 | +1.5V |
| 6 | +1.5V | Reserved |
| 3 | COEX1 | GND |
| 4 | GND | Reserved |
| 1 | WAKE# | +3.3V |
| 2 | +3.3Vom | Reserved |
| Dimension | Value (mm) | Value (inch) |
|---|---|---|
| Full Card Length | 48.05 | 1.892 |
| Half Card Length | 26.80 | 1.055 |
| Width | 30.00 | 1.181 |
| Thickness | 3.80 MAX | 0.150 MAX |
| Ground Pad Area | 25.00 x 15.00 | 0.984 x 0.591 |