YD32-006 Economical Conventional Gravity Feed Spray Gun Webpage Detail Page (English)

I. Product Specifications (SPECIFICATION)

1. Core Parameter Summary Table

2. General Basic Parameters

II. Product Details (PRODUCT DETAILS)

1. Multi-Caliber Brass Nozzle, No Barrier for Full-Scenario Spraying

(1) Three Calibers Cover Needs from Precision to Efficiency

• 1.3mm Precision Nozzle: Suitable for low-viscosity clear coat and water-based wall paint, with fine atomization (particles ≤40μm) and spraying width of 18-22cm. No obvious orange peel after furniture clear coat spraying and no brush marks after wall renovation, meeting the aesthetic needs of civil scenarios;
• 1.5mm Regular Nozzle: Compatible with most medium-to-low viscosity coatings (e.g., nitrocellulose paint, acrylic paint), with spraying width of 22-28cm and efficiency of 10-12㎡/hour (e.g., only 2 minutes to spray one wooden door). It balances precision and speed, serving as the main caliber for decoration and furniture spraying;
• 1.8mm Industrial Nozzle: Designed for medium-viscosity coatings (e.g., hardware anti-rust paint, auto primer) to avoid blockage. The spraying thickness can reach 25-35μm, meeting basic protection needs with one spray, suitable for light industrial coating.

(2) Brass Material, Economical, Durable and Easy to Maintain

2. 50PSI Conventional Pressure, Balancing Efficiency and Ease of Use

(1) Conventional Pressure, Compatible with Most Air Compressors

(2) Basic Pressure Regulation, Quick Start for Beginners

3. 600mL Large Capacity + Humanized Design, Practical and Convenient

(1) Large-Capacity Cup, Reducing Refueling Frequency

(2) Lightweight + Easy Cleaning, No Fatigue in Long-Term Use and Easy Maintenance

III. Application Scenarios (APPLICATION SCENARIOS)

1. Wall/Furniture Renovation by Decoration Teams (Core Scenario)

1. Preparation: Install the 1.3mm nozzle, pour water-based wall paint (viscosity 15s) into the cup (450mL), connect the air compressor and adjust to 50 PSi, test atomization (22cm wide fan shape with uniform particles);
   2. Bulk Spraying: Divide into 2-person groups—one person is responsible for spraying (20cm nozzle distance, 40cm/s speed, spraying walls in sections continuously), and the other is responsible for refueling and masking, completing 25㎡ walls per hour;
   3. Cleaning & Maintenance: Rinse the gun body and nozzle with clean water after daily spraying (water-based paint is easy to clean, taking 2 minutes), and store after drying.
   Result: The 60㎡ walls are completed in 2.5 hours (including preparation time), with uniform coating and no brush marks. The material cost is 15% lower than using a roller (due to high paint utilization), and the team saves 300 yuan in labor costs for a single project. The 20-piece/carton packaging is suitable for team bulk backup.

2. Local Auto Touch-Up in Auto Repair Shops (Scenario 2)

1. Primer Spraying: Install the 1.8mm nozzle, pour primer (200mL), adjust air pressure to 50 PSi, spray quickly once at 25cm nozzle distance (taking 1 minute), and dry for 1 hour;
   2. Topcoat Spraying: Replace with the 1.5mm nozzle, pour topcoat (150mL), adjust air pressure to 48 PSi, apply 3 thin coats (8-minute interval between coats) to ensure uniform color;
   3. Finishing: After touch-up, clean the gun body with thinner and store the nozzle separately to avoid blockage.
   Result: The color difference between the touch-up area and the original paint is ≤ΔE3.0 (basically invisible to the naked eye), with no sagging or particles. Customer satisfaction reaches 90%, and the cost of a single gun is only 1/3 that of a professional auto spray gun, suitable for bulk purchase and backup in repair shops.

3. Furniture Renovation by DIY Enthusiasts (Scenario 3)

1. Novice Operation: Install the 1.5mm nozzle according to the manual, dilute the nitrocellulose paint to a viscosity of 18s and pour into the cup (300mL), connect the air compressor, adjust to 50 PSi as instructed, and test atomization on a waste wood board;
   2. Easy Spraying: Keep the nozzle 18cm away, move uniformly along the wardrobe grain, covering with one coat, taking only 40 minutes in total;
   3. Simple Cleaning: Rinse the gun body with banana oil (taking 1.5 minutes), scrub the cup directly, and store in a toolbox (compact size, no space occupation).
   Result: The renovated wardrobe has uniform color with no obvious spraying marks, and the novice succeeds in the first operation. The total cost (gun + paint) is only 200 yuan, saving 80% compared with hiring a professional team.

IV. Frequently Asked Questions (FAQ)

Q1: "Sagging" (coating drooping) occurs during spraying. What is the reason? How to solve it?

1. Cause Investigation: ①Over-diluted paint (viscosity ＜12s, e.g., water addition exceeding 20% for water-based paint); ②Moving speed ＜25cm/s (excessive paint per unit area); ③Too close nozzle distance (＜15cm, local paint accumulation);
   2. Solution: ①Reduce thinner addition (water addition ≤15% for water-based paint, thinner addition ≤20% for solvent-based paint), test to 15-18s with a viscosity cup; ②Increase moving speed to 30-40cm/s, keep uniform speed (practice with a mobile phone timer if necessary); ③Adjust nozzle distance to 18-22cm to ensure uniform paint adhesion;
   3. Precautions: For sagging coatings, sand them smooth with 400-grit sandpaper after complete drying, then spray a thin coat again to avoid more serious sagging caused by direct coverage.

Q2: There are many spray guns at the same price. What advantages does this one have over "ultra-low-cost entry-level guns"?

1. Atomization Quality: Ultra-low-cost guns (＜100 yuan) usually have atomized particles ＞80μm, prone to graininess; this product’s atomization is ≤50μm, no repeated sanding needed after wall and furniture spraying, saving working hours;
   2. Material Durability: Low-cost guns mostly have plastic bodies + zinc alloy nozzles, prone to body cracking and nozzle wear after 1 month of use; this product’s aluminum alloy body + brass nozzle can last for more than 1 year with normal use, more cost-effective in the long run;
   3. Paint Utilization: The paint utilization rate of low-cost guns is only 40%-50%, requiring 150mL paint per 1㎡ wall; this product’s rate reaches 65%, only needing 100mL. The paint cost saved in long-term use can cover the price difference of the gun.

Q3: The cup occasionally leaks. Is the sealing ring broken? How to handle it quickly?

1. Step 1: Check Installation: Confirm whether the threads of the cup and gun body are tightened (rotate clockwise until it cannot move). If not tightened, paint will leak from the thread gap—just re-tighten;
   2. Step 2: Check the Sealing Ring: If leakage still occurs after tightening, remove the cup and check whether the sealing ring is deformed or has impurities (e.g., paint residue). ①Deformation/cracking: Replace with the original sealing ring (low unit price, it is recommended to prepare 5-10 for backup); ②Impurities: Wipe clean with a cotton swab dipped in solvent and reinstall;
   3. Emergency Tip: When no spare sealing ring is available temporarily, apply a thin layer of petroleum jelly on the sealing ring surface (to enhance sealing), which can be used temporarily for 1-2 times to avoid delaying the spraying process.

Q4: Can a small household air compressor (0.2m³/min) be used? Will it affect the spraying effect?

1. Small-Area Emergency (e.g., one furniture panel, area 2㎡): A 0.2m³/min air compressor can support 1.3/1.5mm nozzles. Use the "intermittent spraying" method (40s spraying + 20s pause) to avoid air pressure drop due to compressor overload (pressure below 45 PSi will affect atomization);
   2. Large-Area Spraying (e.g., whole-house walls, bulk furniture): It is recommended to replace with an air compressor of ≥0.25m³/min. Otherwise, problems such as "unstable air pressure → uneven atomization → coating color difference" will occur, and frequent start-stop of the compressor will shorten its service life;
   3. Adaptation Suggestion: Prioritize air compressors with "air tank ≥10L" when purchasing. The air tank can stabilize air pressure, reducing pressure fluctuations during spraying and ensuring basic effects even with slightly lower displacement.