Centered on "ultra-light portability + flexible adaptation + safe reliability", the YD26 Series Lightweight Telescopic Ladder is optimized to address the pain points of "traditional ladders being heavy, difficult to store, and poorly adapted to low-height scenarios". It has formed differentiated advantages in lightweight design, flexibility, and safety. Its core highlights are as follows:
- YD26-012 weighs only 4.7kg (equivalent to the weight of a 5L bottle of mineral water), which can be carried up and down stairs by adult women with one hand, and even the elderly and teenagers can move it easily, solving the problem of "being unable to carry traditional ladders".
- Although YD26-014 is a 7-step model, its net weight is still controlled at 8.9kg. Male users can carry it from the garage to the living room with one hand. Compared with traditional metal ladders of the same height (weight ≥12kg), its portability is increased by 26%.
The volume after closing is only 1/5 of that in the unfolded state: YD26-012 can be tucked into a hallway cabinet drawer or under a sofa; YD26-014 can stand upright against the balcony corner (occupying only 0.02m²). Users living in small apartments or renting houses do not need to worry about "no space for large ladders", and it can even be carried in a car for outdoor scenarios.
Different from traditional ladders that "are too tall and unusable for low scenarios", this series accurately covers the low-height range of 0.8-2.48m:
- To repair or replace a 1.2m-high wall socket, only 2 steps of YD26-012 need to be unfolded;
- To clean the top of a 1.5m-high balcony low cabinet, 3 steps of YD26-012 unfolded are just right;
- To organize 2.2m-high low shelves in a convenience store, 6 steps of YD26-014 unfolded allow operation without tiptoeing. Compared with fixed-height low ladders (only 1.5m), the number of applicable scenarios is increased by 65%.
Despite the lightweight design, the structural strength is not compromised: The 1.2-1.4mm thick aluminum alloy profile can withstand 120kg load without obvious bending after a bending test; the connection between steps and side poles is fixed with reinforced rivets. After 500 unfolding-retraction cycle tests, there is no looseness or abnormal noise, and the service life is ≥5 years, meeting the needs of long-term light use at home.
- Locking Buckles: Each step is equipped with a spring-locking buckle that automatically pops out and locks into the slot after unfolding. It can only be retracted by manual pressing to unlock, avoiding accidental retraction caused by children's misoperation;
- Anti-Slip Details: The rubber feet at the bottom have a friction coefficient of 0.8, which is not easy to shift on smooth tiled floors; the fine texture on the step surface increases friction with the sole, so there is no slipping risk even if the sole is dusty.
The anodized aluminum alloy surface not only reduces weight but also resists slightly humid (e.g., near bathrooms) and oily (e.g., kitchens) environments: It only needs to be wiped with a dry cloth after daily use, without frequent maintenance. Compared with ordinary iron ladders (easy to rust), the maintenance cost is reduced by 70%.
Scenario Requirement: A user lives in a 60㎡ small apartment and needs to replace a 1.2m-high wall socket and clean a 1.5m-high balcony low cabinet. Only small tools can be stored in the wardrobe, so the ladder needs to be easy to store and lightweight.
Operation Process:
- Take YD26-012 (closed size 60×30×8cm) from under the desk, carry it to the socket with one hand, unfold 2 steps (height 1m), and fit the bottom rubber feet to the tiled floor.
- Stand on the step to replace the socket. After completion, fold the ladder, move it to the balcony, unfold 3 steps (height 1.27m), and clean the dust on the top of the low cabinet.
- After use, tuck the ladder into the hallway cabinet drawer without occupying living room space.
Result: Solves the problem of "no suitable tools for low-height operations". One ladder replaces the dangerous operations of "stepping on stools and moving chairs", increasing safety by 90%.
Scenario Requirement: A user needs to organize a 1.8m-high bookcase (for placing books and decorations) and replace a 1.6m-high bedroom ceiling light. The ladder needs to be height-adaptable and easy to move.
Operation Process:
- Carry YD26-013 to the bookcase with one hand, unfold 4 steps (height 1.6m). The anti-slip texture on the steps ensures stable standing, and both hands can freely pass books.
- Move to the bedroom, unfold 5 steps (height 1.88m). When replacing the ceiling light, the spring buckle has no looseness, and no one else is needed to hold the ladder.
- After completion, fold the ladder and lean it against the bedroom wardrobe without affecting daily activities.
Result: Lightweight and stable, avoiding the trouble of "needing two people to carry traditional ladders", and improving the efficiency of home operations.
Scenario Requirement: A convenience store needs to organize 1.8m-high snack low shelves every day. Most clerks are women, so the ladder needs to be easy to carry and not occupy the customer passage.
Operation Process:
- A clerk takes YD26-013 from under the cash register, carries it to the shelf area with one hand, unfolds 4 steps (height 1.6m), and fits the bottom rubber feet to the convenience store's tiled floor.
- Stand on the steps to organize products. The step width is sufficient to place a small code scanner, and one shelf is organized in 10 minutes.
- After organizing, fold the ladder and place it in the gap at the bottom of the shelf without occupying the customer passage.
Result: Portable and space-saving. Compared with traditional commercial ladders (weight ≥10kg), the physical consumption of clerks is reduced by 30%, and the efficiency of shelf organizing is improved.
Scenario Requirement: A flower shop needs to build a 2.2m-high flower display rack, requiring a ladder to assist in placing flower pots and hanging decorations. The site is small, so the tool needs to be easy to store.
Operation Process:
- Two clerks cooperate to carry YD26-014 (8.9kg) to the display area, unfold 6 steps (height 2.2m), and fix the anti-slip feet on the flower shop's wood floor.
- One person stands on the ladder to place flower pots, and the other passes tools. The ladder has no shaking, and the display setup is completed in 30 minutes.
- After completion, fold the ladder and place it in the corner of the flower shop's storage room without affecting customers' shopping.
Result: Height-adaptable and lightweight, avoiding the trouble of renting large ladders (high cost and difficult storage), and reducing the operating cost of the flower shop.
Scenario Requirement: A user travels by RV for camping, needs to inspect the 2m-high solar panel on the top of the RV and set up a 1.5m-high camping tent, requiring a ladder that is easy to carry in the RV.
Operation Process:
- Take YD26-012 (compact after closing) from the RV trunk, unfold 3 steps to inspect the solar panel. The lightweight design avoids RV load overload.
- When setting up the tent, use the ladder to assist in fixing the top bracket, avoiding stepping on the RV roof (to prevent scratches).
- After use, fold the ladder and put it back into the trunk without occupying the space of camping equipment.
Result: Portable and multi-functional, solving the problem of "no tools for climbing in outdoor scenarios" and improving camping convenience.
A1: Support is not recommended, as there is an overload risk. The rated load-bearing capacity of the equipment is 120kg, and the total weight of the person and tools (125kg) exceeds the limit by 5kg: Although short-term light operations (such as fetching items) may not cause immediate deformation, it will cause fatigue damage to the aluminum alloy profile and shorten the service life; if tools need to be lifted frequently (generating additional impact force), it may also cause failure of the locking buckle, increasing the risk of falling. It is recommended that the tool weight be controlled within 10kg and the total load not exceed 120kg.
A2: This is mostly caused by dust accumulation in the buckle slot or spring aging, and can be fixed by following these steps:
- Slot Cleaning: Use a toothpick or fine brush to clean dust and hair around the buckle, then blow off residual debris with compressed air to prevent impurities from jamming the buckle;
- Spring Maintenance: If the buckle has weak elasticity, drop 1-2 drops of lubricating oil (e.g., sewing machine oil) on the spring, press the buckle repeatedly 10 times to enhance spring elasticity;
- Buckle Inspection: If the buckle is broken or the spring fails, contact after-sales service to replace the buckle of the same model (avoid self-modification which may affect safety). The normal use function can be restored after replacement.
A3: The elderly can use it independently under guidance, and the following safety precautions should be noted:
- Stable Placement: Before use, ensure there are no debris under the ladder, and the rubber feet are fully attached to the ground. Avoid placing it on slippery surfaces such as carpets and foot pads;
- Step-by-Step Operation: When unfolding, confirm that the buckle pops out step by step, and stand on the ladder only after the indicator light (if equipped) is on; when retracting, operate slowly to avoid pinching hands due to rapid closing;
- Caregiver Presence: When using it for the first time or climbing higher than 1.5m, it is recommended that family members be present to provide assistance at any time, avoiding accidents caused by independent operation.
A4: Risks can be reduced through timely maintenance + anti-slip measures:
- Rust Protection: After using it on rainy days, immediately wipe off rainwater on the ladder surface with a dry cloth, especially paying attention to metal connections such as buckles and rivets. Store it after drying to avoid rust caused by residual rainwater;
- Anti-Slip Protection: When using it outdoors on rainy days, choose a hard and non-ponding ground as much as possible. If the ground is wet, place a rubber anti-slip mat (area ≥40×40cm) under the ladder to enhance stability;
- Usage Restriction: Avoid using it outdoors in heavy rain and strong winds to prevent the ladder from being blown over or slipping due to ponding on the ground. Priority should be given to indoor use or operation on sunny days.



