On - line Coal Gas Analyzer KGD - MQ - 521 is used for on - line measurement of gas volume concentration.
Product Introduction
The On - line Coal Gas Analyzer KGD - MQ - 521 adopts non - dispersive infrared (NDIR) gas analysis technology with independent intellectual property rights, long - life electrochemical sensing technology, and MEMS - based thermal conductivity technology. It can simultaneously measure the calorific values of coal gas and biogas on - line, as well as the volume concentrations of gases such as CO, CO₂, CH₄, H₂, O₂, and CₙHₘ.

Product Features
- Simultaneously measures gas components and calorific values: It can simultaneously measure the volume concentrations of multi - component gases such as CO, CO₂, CH₄, H₂, O₂, and CₙHₘ, and automatically calculate and display the calorific values of coal gas and natural gas, replacing the combustion - type calorific value meter.
- High measurement accuracy: No cross - interference among multi - component measured gases: CₙHₘ has no interference on the measurement result of CH₄, and CO, CO₂, and CH₄ have no interference on the measurement result of H₂. It is less affected by the outside world, and the change of gas sampling flow has no impact on the measurement result of the H₂ thermal conductivity sensor. Measuring the volume concentration of CₙHₘ ensures the accuracy of the calorific values of gases such as coke oven gas, mixed gas, producer gas, and straw gas.
- High degree of automation: Equipped with a professional pre - treatment solution, it has digital and analog output functions. With high automation and low maintenance, it can achieve real - time on - line monitoring without manual on - site operation, greatly reducing the labor cost of enterprises.
- Stable working performance: The sensor has a constant - temperature design, eliminating the influence of ambient temperature on the infrared sensor and ensuring the long - term on - line operation of the instrument. All parts in contact with the sample gas are made of special heat - resistant and corrosion - resistant materials such as stainless steel and polytetrafluoroethylene, making the equipment less likely to be corroded and having a long service life.
Technical Parameters
Measurement Component | CO/CO2/CH4/H2/O2/C2H2/C2H4/CnHm*/Calorific Value |
Measurement Principle | CO/CO2/CH4/C2H2/C2H4/CnHm: NDIR; H2: TCD; O2: ECD |
Measurement Range | CO/CO2/CH4/H2: (0~100)%; O2: (0~25)%; C2H2/C2H4/CnHm: (0~10%) (Optional) |
Measurement Accuracy | CO/CO2/CH4/H2: (0~100)±0.25%; C2H2/C2H4/CnHm: (0~10)±0.25% (Optional) |
Linear Error | CO/CO2/CH4/C2H2/C2H4/CnHm: ±1%F.S.; O2/H2: ±2%F.S. |
Resolution | 0.01% |
Repeatability | ≤1% |
Response Time | T90<15s (NDIR) |
Optimal Flow Rate | (0.7~1.2) L/min |
Inlet Gas Pressure | (2~50) kPa |
Gas Requirements | Dust - free, water - free, oil - free |
Electrical Parameters | - |
Communication | RS - 485/RS - 232, (4 - 20) mA |
Power Supply | 100~240VAC, 100W |
Display | LCD |
Functional Configuration | Built - in zero - adjustment air pump, can realize automatic air zero - adjustment. Calorific value units Kcal/m³ and MJ/m³ can be freely switched. Self - diagnosis function is available, and sensor status can be checked online. |