ISUZU 18meter Aerial Platform Bucket Lift Work Lifting Working Manlift Truck
These trucks are built on an ISUZU chassis and equipped with a hydraulic boom and a working bucket or basket at the end. Here are some common specifications:
Working Height: The primary feature is the maximum working height, which in this case is 18 meters (approximately 59 feet).
Boom Type: The boom can be either a telescopic boom (straight, extends and retracts) or an articulating boom (jointed, or "knuckle" boom, allowing it to bend and reach over obstacles). Some models may have a combination of both.
Working Radius: This refers to the horizontal reach of the boom.
Bucket Capacity: The rated load capacity of the working bucket is typically around 200 kg (about 440 lbs), which is sufficient for one or two workers and their tools.
Chassis: They are commonly built on ISUZU chassis models like the NKR, NPR, and 100P. These are known for their reliability and fuel efficiency.
Engine: They are powered by an ISUZU diesel engine, with various horsepower ratings depending on the specific model.
Safety Features: Critical safety features include:
Outriggers: Hydraulic stabilizers (usually H-type or V-type) that extend from the chassis to provide stability on uneven ground.
Safety Devices: Such as relief valves, balance valves, and emergency hydraulic pumps.
Control Systems: Controls are located both on the ground and in the working bucket for easy operation and safety. Some models also offer wireless remote control.
Applications: These trucks are versatile and used across many industries, including:
Municipal services (street light and traffic signal maintenance)
Utility companies (power line repair)
Construction and building maintenance
Landscaping (tree trimming)
Telecommunications
ISUZU 18M Aerial platform Truck Technical date |
General | Descriptions | Specifications and types |
Truck Brand | CLW BRAND |
Chassis Brand | ISUZU |
Approx. Dimension | 5998*2070*3080mm |
GVW. | 4495kg |
Cab | Cab Capacity | 2 persons' seat |
Air Conditioner | Air Conditioner |
Chassis | Model | QL1110ANKAY |
Drive Type | 4X2,Left hand drive |
Fuel Type | Diesel |
Engine Make & Model | 4 H K1-T CG61 |
Power | 190HP |
Emission Standard | EURO 6 |
Wheelbase/No.of axle | 3815mm / 2 |
Tyre Specfication | 235/75R17.5 |
Tyre Number | 6 tyres and 1 spare tyre |
Max Speed | 90 km/h |
Paint | Automative metallic paint |
|
Truck body | Maximum working height | 18 m |
Working platform rated load | 200kg |
Operating range at maximum operating height | 5m |
maximum operating range | 11m |
Working height at maximum working range | 7m |
Outrigger span | Horizontal | 4200mm |
Vertical | 4000 mm |
Hoarding and walking platform | Stainless steel fence and non-slip walking platform |
working platform | Material | high strength stainless steel |
Size | 1600X700X1000mm |
Arm form | 4-section 18-sided arm boom, synchronous telescopic |
Rotary device | 360 degree continuous rotation |
Outrigger span | Front V rear H type, individually adjustable (control) |
operate | Electronically controlled operation, with manual emergency operation |
Control System | CAN control system,equipped with wireless remote control, to achieve stepless speed regulation |
leveling system | Hydraulic automatic leveling |

Established in Sep. 2004,Chengli Special Automobile Co., Ltd is an important branch of CLW group with registered capital 100,000,000 RMB(14
millions US Dollars) and total capital 6,000,000,000(840 millions US Dollars).
Overseas Market
Trucks from Chengli Special Automobile Co., Ltd have been sold to more than 29 provinces in China and more than 80 overseas countries and regions in
Asia, Africa, South America, middle east and so on, such as Russia, Mongolia, Philippines, Vietnam, Cambodia, Myanmar, Laos, Kazakhstan, Uzbekistan,
Kyrghzstan, Tanzania, Zambia, Nigeria, Australia, Chile, Bolivia, Ethiopia, Sudan, Malaysia, Congo, El Salvador, Iraq, New Zealand, Chile, Bolivia, Argentina and also truck body for client drawing