Product Overview

The Schneider ELAU SH30552P11A2100 is a PacDrive SH055 permanent-magnet synchronous servo motor corresponding to the legacy model SH055/80009/0/1/00/00/10/00/00. It provides 0.60 kW rated power, 0.72 Nm rated torque and an 8000 RPM rated speed.

This configuration uses a DIN 6885-A keyed shaft, an SKS36 single-turn Hiperface encoder and a shaft sealing ring. It does not include a holding brake. The IP65/IP65 protection configuration makes it distinct from similar SH055 versions supplied without a shaft seal.

Main Features

• Exact commercial reference: SH30552P11A2100
• Legacy model: SH055/80009/0/1/00/00/10/00/00
• Rated power: 0.60 kW
• Rated speed: 8000 RPM
• Maximum mechanical speed: 9000 RPM
• Rated torque: 0.72 Nm
• Standstill torque: 0.80 Nm
• Peak torque: 2.50 Nm
• DIN 6885-A keyed shaft
• SKS36 single-turn Hiperface encoder
• Without holding brake
• With shaft sealing ring
• IP65/IP65 protection configuration

Technical Specifications

Compatible System and Applications

The SH30552P11A2100 is suitable for PacDrive machine axes requiring high rotational speed and positive torque transmission through a keyed shaft. Typical applications include gearboxes, belt drives, rotary cutters, packaging mechanisms, conveyor axes, feeders and automated assembly equipment.

The motor must be matched to the installed servo drive, controller project, feedback cable, motor cable and mechanical load. Confirm that the machine is configured for an SKS36 single-turn feedback system.

Maintenance and Replacement Notes

Verify the exact commercial reference and complete legacy model before replacement. The keyed shaft, shaft seal and IP65/IP65 configuration are important mechanical and environmental characteristics.

SH30552P11A2000 is a related keyed-shaft version without the same sealing configuration. It should not automatically replace SH30552P11A2100 in an installation that requires the shaft sealing ring.

Check the key dimensions, coupling, gearbox input, radial load, axial load, connector orientation and cable condition. Verify the encoder type, brake requirement, servo-drive parameters and controller project before commissioning.

Related Models

Related 0.60 kW SH055 versions include SH30552P11A2000 without the shaft sealing ring, SH30552P12A2100 with keyed shaft and SKM36 multi-turn feedback, SH30552P12F2000 with keyed shaft and holding brake, SH30552P01A2100 with smooth shaft and shaft seal, and SH30552P02F2100 with smooth shaft, multi-turn feedback and brake.

Inquiry and Supply Notes

Please provide photographs of the nameplate, shaft key, shaft seal, flange and connectors. Also provide the installed drive model and motor and encoder cable references.

The exact shaft configuration, feedback system, protection level, hardware revision, product condition, testing status, availability and delivery time must be confirmed before quotation.