Product Overview

The Schneider ELAU SH30703P12F2100 is a fully configured 3-stack PacDrive SH070 servo motor corresponding to the legacy technical model SH070/60030/0/1/00/00/10/11/00. Its associated ELAU article number is 65012302V017003.

The motor provides 1.45 kW rated power, 2.30 Nm rated torque, 3.10 Nm standstill torque and 11.30 Nm peak torque. Rated speed is 6000 RPM, with a maximum speed of 8000 RPM.

This configuration combines a keyed steel shaft, SKM36 SinCos multi-turn encoder, integrated 3 Nm holding brake and IP65 protection at both the shaft and housing. These options make the complete model code critical during replacement selection.

Main Features

• Exact commercial reference: SH30703P12F2100
• Legacy model: SH070/60030/0/1/00/00/10/11/00
• ELAU article number: 65012302V017003
• Rated power: 1.45 kW
• Rated speed: 6000 RPM
• Maximum speed: 8000 RPM
• Rated torque: 2.30 Nm
• Standstill torque: 3.10 Nm
• Peak torque: 11.30 Nm
• Keyed steel shaft
• DIN 6885-A shaft key
• SKM36 SinCos multi-turn encoder
• Integrated holding brake
• Brake holding torque: 3.00 Nm
• IP65 shaft and housing protection

Technical Specifications

Compatible System and Applications

The SH30703P12F2100 is intended for PacDrive machine axes requiring high peak torque, positive keyed-shaft transmission, multi-turn position feedback and shaft holding after power removal.

Typical applications include vertical positioning axes, gearbox-driven mechanisms, rotary tables, packaging equipment, printing machinery, indexing systems and automated material-handling equipment.

Maintenance and Replacement Notes

Confirm every element of the full SH30703P12F2100 model. Another 1.45 kW SH070 motor may use a smooth shaft, single-turn encoder, no brake or different environmental protection.

Replacing an SKM36 multi-turn motor with an SKS36 single-turn version may require controller-project changes and a new homing procedure. Verify encoder compatibility with the installed servo drive and machine software.

Inspect the keyed coupling, key dimensions, gearbox input, shaft seal, holding brake, motor cable, encoder cable and connector orientation. Test the brake for correct release and holding operation before returning the machine to production.

Related Models

SH30703P12F2000 is the related keyed-shaft, multi-turn brake version without the IP65 shaft configuration. SH30703P12A2000 uses the same shaft and encoder type but does not include a holding brake.

SH30703P11F2100 uses a keyed shaft and SKS36 single-turn feedback. SH30703P02F2100 is the corresponding smooth-shaft, multi-turn brake configuration.

Inquiry and Supply Notes

Please provide photographs of the full nameplate, shaft and keyway, shaft seal, brake and connectors. Also provide the installed servo-drive model, controller and cable references.

The complete model, encoder type, brake condition, shaft dimensions, product condition, testing status, availability and delivery time must be confirmed before quotation.