Product Overview

The Schneider ELAU SH32051P01A2000 is a PacDrive SH205 / SH3 205 permanent-magnet synchronous servo motor corresponding to the legacy technical model SH205/30360/0/0/00/00/00/00/00 and ELAU article number 65015102V001004.

This standard 1-stack configuration provides 5.50 kW rated power at 400 V, 17.5 Nm rated torque and 36.9 Nm continuous stall torque. It operates at a rated speed of 3000 RPM and supports a maximum mechanical speed of 3800 RPM.

The motor uses a smooth 38 mm shaft, an SKS36 single-turn SinCos feedback system, no holding brake and a 90-degree rotatable connector. It is the recommended base product page for the SH205/30360 performance platform.

Main Features

• Exact commercial reference: SH32051P01A2000
• Legacy model: SH205/30360/0/0/00/00/00/00/00
• ELAU article number: 65015102V001004
• PacDrive SH205 / SH3 205 servo motor
• 1-stack motor construction
• Rated power at 400 V: 5.50 kW
• Rated speed: 3000 RPM
• Maximum mechanical speed: 3800 RPM
• Rated torque: 17.5 Nm
• Continuous stall torque: 36.9 Nm
• Peak torque: 110 Nm
• Smooth steel shaft
• SKS36 single-turn SinCos encoder
• Without holding brake
• 90-degree rotatable connector

Technical Specifications

Compatible System and Applications

The SH32051P01A2000 is intended for compatible Schneider ELAU PacDrive servo-drive and motion-controller systems. Typical applications include packaging machinery, printing and converting equipment, rotary positioning systems, indexing machines, material-handling equipment and gearbox-driven automation axes.

The smooth shaft is normally connected through a clamping coupling or another suitable keyless mechanical interface. Confirm the shaft dimensions, motor flange, coupling fit, load inertia and permissible radial and axial loads before installation.

Maintenance and Replacement Notes

Verify the complete SH32051P01A2000 commercial reference, legacy slash-format model and article number before replacement. Do not select a replacement only from the SH205 frame size or 5.50 kW power rating.

Confirm the 30360 winding, smooth shaft, SKS36 single-turn encoder, non-brake construction, 90-degree connector and IP54/IP65 protection code. Straight-connector SH3 references are not automatically interchangeable because cable routing and installation clearance may differ.

Inspect the motor cable, feedback cable, connector pins, protective earth, bearings, shaft and driven mechanism. Verify the installed servo drive, controller project, feedback settings and complete cable set before commissioning.

Related Models

Related SH205/30360 references include SH32051P01A2100 with IP65 shaft protection, SH32051P02F2200 with SKM36 multi-turn feedback, holding brake and IP67 housing, and SH32051P12F2100 with keyed shaft, multi-turn feedback and holding brake.

Straight-connector references ending in 1000, 1100 or 1200 must be checked for connector orientation, cable compatibility and installation clearance before substitution.

Inquiry and Supply Notes

Please provide photographs of the complete nameplate, shaft, flange and connectors when requesting a quotation. Also provide the installed servo-drive model, controller information and motor and feedback cable references.

The exact commercial reference, legacy model, encoder, shaft configuration, connector orientation, product condition, testing status, availability and delivery time must be confirmed before quotation.