Specifications
Brand Name :
Bently Nevada
Model Number :
330130-030-02-05
Place of Origin :
USA
MOQ :
1
Price :
66USD
Payment Terms :
T/T
Supply Ability :
in stock
Delivery Time :
2-3 work days
Packaging Details :
Brand new and original
Product Model :
330130-030-02-05
Product Parameters :
3300 XL 8 mm Extension Cable
Country of origin :
USA
Place of shipment :
Xiamen,China
Manufacturer :
Bently Nevada
Shipping :
TNT, DHL, FedEx, EMS, UPS
MOQ :
1 Piece
Packaging :
Original New Packaging
Description
Bently Nevada 330130-030-02-05 3300 XL Standard Extension Cable
Bently Nevada 330130-030-02-05 3300 XL Standard Extension Cable

330130-030-02-05 is a Bently Nevada 3300 XL standard extension cable used in the 3300 XL 8 mm proximity transducer system. It is designed for vibration and position measurement in industrial rotating machinery, such as compressors and fluid-film bearing equipment.

Bently Nevada 330130-030-02-05 3300 XL Standard Extension Cable
Specifications
  • Cable Length: 030 - 3.0 meters (9.8 feet)
  • Connector Protector and Cable: 02 - Standard cable with connector protector
  • Agency Approval: 05 - CSA, ATEX, IECEx Approvals
Bently Nevada 330130-030-02-05 3300 XL Standard Extension Cable
Key Features
  • System Interchangeability: It’s part of the 3300 XL system, so probes and sensors can be swapped out freely without needing bench calibration. That helps keep measurements consistent and reliable.
  • Built for tough environments:: Should be fine in most rough conditions. With FEP insulation and a protected connector, moisture, chemicals, and normal wear are usually not a big problem.
  • Signal quality: It’s a 75-ohm triaxial cable, mainly to keep noise lower, so the signal stays more consistent.
  • Safety approval: It has ATEX, IECEx, and CSA approvals, so it’s generally ok to use in hazardous areas with possible gas risks.
Bently Nevada 330130-030-02-05 3300 XL Standard Extension Cable
Application scenarios
  • Vibration & Position Monitoring
  • Fluid-Film Bearing Machinery
  • Keyphasor & Speed Sensing
  • Hazardous Area Use
Bently Nevada 330130-030-02-05 3300 XL Standard Extension Cable
About Our Company

We’ve been in this for over 20 years, and over time we’ve built a supply network that covers more than 150 countries. In some cases, shipping can be pretty quick—sometimes just 1 to 3 days.

Before anything goes out, we always check the parts to make sure they’re in good condition and meet the basic requirements.

We also offer a 12-month warranty, so if there’s any issue later, you’re still covered.

Mainly we just try to help keep your machines running and cut down downtime with parts that actually work.

If you don’t see what you need, just tell us—we can check it on our side.

Bently Nevada 330130-030-02-05 3300 XL Standard Extension Cable
Frequently Asked Questions

1. How does the 3 m cable length fit into the system?
This cable is used as part of a 3300 XL setup where the total length needs to reach either 5 m or 9 m. It’s combined with different probe lengths to make up the full system length.


2. What is the -02 connector protection?
It just means the connectors come with protective covers. They help keep out dust, oil, and moisture, and also reduce wear on the connection points over time.


3. What does the -05 approval mean?
It means the cable is certified under ATEX, IECEx, and CSA standards, so it’s approved for use in hazardous areas where explosive gases or similar risks may exist.


4. Can it be used with older systems?

Yes. It works with older 3300 5 mm and 8 mm systems, but performance will follow the older system if mixed.


5. How much can it bend?

It can bend, but not too tightly. The minimum bend radius is 25.4 mm (about 1 inch). If you bend it tighter than that, it could affect performance or even damage the cable.


Bently Nevada 330130-030-02-05 3300 XL Standard Extension CableBently Nevada 330130-030-02-05 3300 XL Standard Extension Cable
Related Products
330101-30-63-10-02-CN 330904-05-14-05-02-00
330104-03-06-05-02-00 330930-040-00-00
330104-05-15-05-02-00 330909-00-60-10-02-05
330101-00-60-10-02-00 21000-16-10-15-057-03-02
330709-000-070-10-02-00 21000-16-10-15-102-03-02
330101-00-56-10-02-00 21000-16-10-15-114-03-02
330103-00-03-10-02-00 21000-16-10-15-144-03-02
330106-05-30-15-02-CN 991-01-XX-01-CN
21000-28-10-00-098-04-02 3500/93 135799-02
21000-28-10-00-217-04-02 22810-00-10-10-02
330104-00-05-10-02-00 330193-00-05-10-00
330101-00-08-20-02-05 330103-02-12-05-02-CN
330130-070-00-00 330103-06-13-05-02-CN
330130-080-01-05 330104-00-04-10-02-CN
330703-000-060-50-12-00 990-05-XX-01-CN
330103-00-06-15-02-CN 330101-30-63-15-02-CN
330130-030-01-CN 330104-00-04-50-11-00
102044-00-18-10-02 330104-00-12-10-02-00
144181-50 330104-00-15-10-02-00
3500/42E 3300/05
3500/50E 330103-00-07-20-02-00
330101-30-63-10-02-00 126599-01
330130-035-00-CN 990-04-70-01-00
330130-035-01-CN 330103-00-15-05-01-00
330130-045-01-CN 330905-00-10-10-02-00
330104-00-07-05-02-00 991-06-50-01-00
330130-085-01-00 330103-00-15-10-02-00
Request a Quote

Would you like a quote for these P/Ns?

Contact: Miya Zheng
Phone: +86 180 2077 6792
Send your message to this supplier
Send Now

Bently Nevada 330130-030-02-05 3300 XL Standard Extension Cable

Ask Latest Price
Watch Video
Brand Name :
Bently Nevada
Model Number :
330130-030-02-05
Place of Origin :
USA
MOQ :
1
Price :
66USD
Payment Terms :
T/T
Contact Supplier
video
Bently Nevada 330130-030-02-05 3300 XL Standard Extension Cable
Bently Nevada 330130-030-02-05 3300 XL Standard Extension Cable
Bently Nevada 330130-030-02-05 3300 XL Standard Extension Cable
Bently Nevada 330130-030-02-05 3300 XL Standard Extension Cable

AMIKON LIMITED

Verified Supplier
1 Years
fujian, xiamen
Since 2004
Business Type :
Trading Company
Total Annual :
85682000-125000000
Employee Number :
70~80
Certification Level :
Verified Supplier
Contact Supplier
Submit Requirement