MachineU > China Products > Electrical Equipment & Supplies
Durable JINJIA DC 02D 03 DC power jack connector rated 30V DC 2A with insulation resistance 100 M min
Durable JINJIA DC 02D 03 DC power jack connector rated 30V DC 2A with insulation resistance 100 M min
Specifications
Mounting Type :
弯插
Connector Type :
DC电源插座
Rated current :
2A
working temperature :
-20℃~+70℃
Inside Contact Diameter :
2mm
Rated voltage :
30V
Outside Contact Diameter :
6.4mm
Description :
Power Barrel Connector Jack 2mm ID 6.4mm OD Through Hole, Right Angle
Mfr. Part # :
DC+02D-03
Package :
Through Hole
Model Number :
DC+02D-03
Description

Product Overview

This specification applies to DC POWER JACK connectors used in electronic products. Designed for reliable electrical connections, these jacks offer specific operational and environmental tolerances.

Product Attributes

  • Brand: Shenzhen JinJiaRun Electronics Technology Co.,Ltd
  • Origin: Shenzhen
  • Product Type: DC POWER JACK

Technical Specifications

ItemPropertyTest ConditionPerformance
2. Rated / Practical temperature range-20 to +7085% RH.MAX. Humidity
Preservation temperature range-10 to +4085% RH.MAX. Humidity
Rated voltage and current (MAX.)30V DC, 2A
AppearanceNo scratches, soil, rust or discoloration on the surface.
4. Electrical efficiency / Withstand VoltageWithstand AC 500V (50/60Hz RMS) between two non-contact terminals for 1 minuteNo dielectric breakdown shall occur.
Insulation ResistanceApply 500V DC between any contactless terminal and the other terminal, with an insulation gauge and last for 1 minute 5 seconds.100 M Min.
Contact ResistanceTake a pair of matched terminals and measure the tail end of each terminal (voltage maximum 20mV, current maximum 100mA)30 m MAX.
5. Mechanical Performance / Insertion and Extraction ForcePlug and unplug with a matching plug at a frequency of 20-30 times per minute.0.33kgf
Terminal StrengthEvery terminal should be capable of withstand a force of 0.5 kgf for 10 seconds.No looseness, damage, etc., but terminal deformation is acceptable.
6. Durability / Life testUnder no load, plug and unplug with a matching plug for 5000 times at a frequency of 20-30 times per minute.Appearance: No obvious change or destruction. Contact resistance: < 30 m. Insertion/extraction force: 0.3 to 3 kgf.
7. Solderability / Resistance to soldering heatTerminal dipped in solder at 2603 for 51 seconds.Plastic base should not be deformed, terminals should not fall off.
SolderabilitySolder temperature: 2453C. Dip time: 30.5 seconds.Coating of solder area should be more than 95%.
8. Environment test / Cold testHousing placed at -25 3 C for 96 hours, then under standard atmospheric conditions for 1 hour.Appearance: No obvious change. Contact resistance: 100m max. Insulation resistance: 100 M min. Withstand voltage: AC 500V.
Heat testHousing stored at 852 for 96 hours, then under standard atmospheric conditions for 1 hour.(Performance details not explicitly stated for heat test alone, but implied to meet general standards)
Humidity testHousing stored at 403 with 90% ~ 95% RH for 96 hours, then under standard atmospheric conditions for 1 hour.Appearance: No obvious change. Contact resistance: 100m max. Insulation resistance: 100 M min. Withstand voltage: AC 500V.
Salt spray testTemperature: 35 2. Solution: 5 1%. Spray time: 24 hours. Washed and dried at room temperature after experiment.No obvious rust in the appearance.
9. Test condition / Standard ConditionsTest and measurement temperature: 15C to 35C, relative humidity: 25% to 85%, atmospheric pressure: 86 kPa to 106 kPa.For doubtful judgments: 201C, 63% to 67% RH, 86 kPa to 106 kPa.
10. Amendment / Modification ProcessSpecifications require negotiation and agreement between manufacturer and customer.N/A

2411220237_JINJIA-DC-02D-03_C718036.pdf

Send your message to this supplier
Send Now

Durable JINJIA DC 02D 03 DC power jack connector rated 30V DC 2A with insulation resistance 100 M min

Ask Latest Price
Product Detail
Mounting Type :
弯插
Connector Type :
DC电源插座
Rated current :
2A
working temperature :
-20℃~+70℃
Inside Contact Diameter :
2mm
Rated voltage :
30V
Contact Supplier
Durable JINJIA DC 02D 03 DC power jack connector rated 30V DC 2A with insulation resistance 100 M min

Shenzhen ECER Network Technology Co., Ltd.

Verified Supplier
17 Years
anhui, shenzhen
Since 2009
Business Type :
Manufacturer, Distributor/Wholesaler, Agent, Importer
Main Products :
FFC FPC Connector, Memory Connectors, Power Connectors
Total Annual :
10000000-50000000
Employee Number :
300~500
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Power Connectors
MachineU China Products Electrical Equipment & Supplies
Contact Supplier
Submit Requirement