The LCC40PW-M is a horizontal PCB mount connector, part of the LC40 connector series. It features a three-pin configuration and an orange plastic housing, specifically designed for lithium battery connections in non-wire-out controllers, facilitating connections between the controller, battery, and motor. This product is engineered for reliable performance in demanding environments.
| Category | Specification | Details |
|---|---|---|
| Electrical Characteristics | Rated Current | 45A MAX (10AWG 0.08mm/6.0mm, 0.31mm 40K) |
| 35A MAX (12AWG 0.08mm/4.0mm, 0.31mm 40K) | ||
| Withstand Voltage | 600V DC | |
| Insulation Resistance | 2000M | |
| Contact Resistance | 0.6m | |
| Mechanical Characteristics | Service Life | 50 Cycles |
| Mated Insertion Force | 9.0kgf | |
| Mated Unmating Force (with latch) | 10kg | |
| Environmental Resistance | Salt Spray (Main Copper Parts) | 48h |
| (Auxiliary Solder Pins) | 12h | |
| Working Temperature | -40 to 120 | |
| Connection Method | Soldering | |
| Soldering Process Parameters (Wave Soldering) | Preheat Termination Temperature (Upper Zone) | 160C |
| Preheat Termination Temperature (Lower Zone) | 210C | |
| Temperature (Lower Zone) | 240C ~ 270C | |
| Soldering Duration | 3~6s | |
| Storage Conditions | Temperature | -1040 |
| Relative Humidity | 80% | |
| Environment | Clean, dry environment, free from acid, alkali, or corrosive gases. Silver-plated parts should be stored away from light, sealed, and protected from prolonged air exposure or contact with sulfides. Avoid bare-hand contact. | |
| Transportation | Suitable for conventional transportation. Avoid collision, severe vibration, rain, snow, and water immersion. |