MachineU > China Products > Tools & Hardware > Hardware > Flanges
X2CrNiMo18-14-3 Stainless Steel 1.4435 EN1092-1 Type 01 Slip on Plate Flange
X2CrNiMo18-14-3 Stainless Steel 1.4435 EN1092-1 Type 01 Slip on Plate Flange
X2CrNiMo18-14-3 Stainless Steel 1.4435 EN1092-1 Type 01 Slip on Plate Flange
X2CrNiMo18-14-3 Stainless Steel 1.4435 EN1092-1 Type 01 Slip on Plate Flange
X2CrNiMo18-14-3 Stainless Steel 1.4435 EN1092-1 Type 01 Slip on Plate Flange
X2CrNiMo18-14-3 Stainless Steel 1.4435 EN1092-1 Type 01 Slip on Plate Flange
X2CrNiMo18-14-3 Stainless Steel 1.4435 EN1092-1 Type 01 Slip on Plate Flange
X2CrNiMo18-14-3 Stainless Steel 1.4435 EN1092-1 Type 01 Slip on Plate Flange
X2CrNiMo18-14-3 Stainless Steel 1.4435 EN1092-1 Type 01 Slip on Plate Flange
X2CrNiMo18-14-3 Stainless Steel 1.4435 EN1092-1 Type 01 Slip on Plate Flange
Specifications
Steel Number :
1.4435
Standard :
EN1092-1 Type 01
Type :
so flanges
Material :
X2CrNiMo18-14-3
Description
X2CrNiMo18-14-3 EN1092-1 Type 01So Flanges - Stainless Steel DIN 1.4435 Slip On Flange
Material Specifications
Grade X2CrNiMo18-14-3
Number 1.4435
Classification Austenitic stainless steel
Density 8 g/cm³
Applicable Standards
  • EN 10088-2:2005 - Stainless steels - Technical delivery conditions for sheet/plate and strip
  • EN 10088-3:2005 - Stainless steels - Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products
  • EN 10028-7:2007 - Flat products made of steels for pressure purposes - Stainless steels
  • EN 10222-5:2000 - Steel forgings for pressure purposes - Martensitic, austenitic and austenitic-ferritic stainless steels
  • EN 10216-5:2014 - Seamless steel tubes for pressure purposes - Stainless steel tubes
  • EN 10217-7:2005 - Welded steel tubes for pressure purposes - Stainless steel tubes
  • EN 10296-2:2005 - Welded circular steel tubes for mechanical and general engineering purposes - Stainless steel
  • EN 10253-3:2008 - Butt-welding pipe fittings - Wrought austenitic and austenitic-ferritic stainless steels
  • EN 10253-4:2008 - Butt-welding pipe fittings - Wrought austenitic and austenitic-ferritic stainless steels
  • EN 10272:2007 - Stainless steel bars for pressure purposes
  • EN 10250-4:2000 - Open steel die forgings for general engineering purposes - Stainless steels
  • EN 10297-2:2005 - Seamless circular steel tubes for mechanical and general engineering purposes - Stainless steel
  • EN 10088-1:2005 - Stainless steels - List of stainless steels
  • EN 10088-5:2009 - Stainless steels - Technical delivery conditions for bars, rods, wire, sections and bright products
  • EN 10088-4:2009 - Stainless steels - Technical delivery conditions for sheet/plate and strip
X2CrNiMo18-14-3 Stainless Steel 1.4435 EN1092-1 Type 01 Slip on Plate Flange
Chemical Composition
Particular ranges of sulphur content may provide improvement of particular properties. For machinability a controlled sulphur content of 0.015% to 0.030% is recommended and permitted. For weldability, a controlled sulphur content of 0.008% to 0.030% is recommended and permitted. For polishability, a controlled sulphur content of 0.015% max is recommended. Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast.
Element Content (%)
C max 0.03
Si max 1
Mn max 2
Ni 12.5 - 15
P max 0.045
S max 0.015
Cr 17 - 19
Mo 2.5 - 3
N max 0.11
Mechanical Properties
Tensile Strength (Rm) - MPa
+A Condition 490-700
+AT Condition 490-690
0.2% Proof Strength (Rp0.2) - MPa
+A Condition 190-240
+AT Condition 190-200
Impact Energy (KV) - J
Transverse, +A Condition +20°C: 60 | -196°C: 60
Longitudinal, +A Condition +20°C: 100
Elongation at Fracture (A) - %
+A Condition 30-45
Longitudinal, +AT Condition 40
Brinell Hardness (HB)
+A Condition 215
+AT Condition 200
Material Properties
  • Resistance to intergranular corrosion: in the delivery condition - yes; in the sensitized condition - yes
  • Steel shall not be applied at a metal temperature lower than -270°C
Equivalent Grades
Warning! Only for reference
EU EN USA Germany DIN, WNr Japan JIS France AFNOR England BS Italy UNI China GB Sweden SS Czechia CSN Finland SFS Russia GOST Inter ISO
X2CrNiMo18-14-3 316L
TP316L		 X2CrNiMo18-14-3 SUS316L Z3CND17-12-03
Z3CND18-14-03		 316S13
316S14		 X2CrNiMo17-13 00Cr17Ni14Mo2 2353 17350 752 03KH17N14M3 Type19a
Product tags

din en 1092-1 flange

,

din flange standard

,

din bs en 1092-1 flanges
Send your message to this supplier
Send Now

X2CrNiMo18-14-3 Stainless Steel 1.4435 EN1092-1 Type 01 Slip on Plate Flange

Ask Latest Price
Product Detail
Steel Number :
1.4435
Standard :
EN1092-1 Type 01
Type :
so flanges
Material :
X2CrNiMo18-14-3
Contact Supplier
X2CrNiMo18-14-3 Stainless Steel 1.4435 EN1092-1 Type 01 Slip on Plate Flange
X2CrNiMo18-14-3 Stainless Steel 1.4435 EN1092-1 Type 01 Slip on Plate Flange
X2CrNiMo18-14-3 Stainless Steel 1.4435 EN1092-1 Type 01 Slip on Plate Flange
X2CrNiMo18-14-3 Stainless Steel 1.4435 EN1092-1 Type 01 Slip on Plate Flange
X2CrNiMo18-14-3 Stainless Steel 1.4435 EN1092-1 Type 01 Slip on Plate Flange

BEST PIPELINE EQUIPMENT CO.,LTD

Verified Supplier
9 Years
jiangsu, suzhou
Since 2010
Business Type :
Manufacturer, Distributor/Wholesaler, Agent, Importer, Exporter, Trading Company, Seller, Other
Main Products :
Alloy Steel Seamless Pipes, Boiler Steel Pipe, Heat Resistant Stainless Steel Pipe
Total Annual :
1000000-5000000
Employee Number :
116~209
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Slip on Plate Flange
MachineU China Products Tools & Hardware Hardware Flanges
Contact Supplier
Submit Requirement