Ceramic plunger pump product overview

Ceramic plunger pumps are positive displacement pumps and reciprocating pumps. The plunger pump causes the fluid medium to work through the pressure difference generated by the reciprocating movement of the plunger in the plunger cylinder, resulting in changes in the sealing volume in the plunger cylinder. By changing the working stroke of the plunger, the flow rate of the plunger pump can be controlled.

Application areas
Products are widely used in the ceramic industry (ceramic bowl factory, ceramic stone), electric porcelain (electric porcelain factory), medicine (pharmaceutical factory), chemical industry (chemical factory), petroleum, environmental protection (water treatment, municipal sewage, papermaking sludge, glass Polishing, steel rolling, electroplating wastewater, rinsing wastewater, tannery, printing and dyeing wastewater) and other industries.

Advantages of ceramic plunger pump
Hydraulic double-cylinder double-acting high-pressure mud pump has smooth operation, low noise, high pressure, small pressure fluctuation, small size, light weight, easy installation, operation and maintenance, and long service life.
It can be used for various types of slurry supply, and can also be used to transport mud, cleaning sewage, ore slurry, coal slurry (or other suspensions) over long distances, and can be equipped with a filter press. The filter press feeds and transports materials, with large flow rate and stable pressure, which can effectively reduce the moisture content of the mud cake.
The new generation of titanium alloy anti-corrosion plunger pump has better corrosion resistance and wear resistance. This material can withstand full concentration of hydrochloric acid, full concentration of liquid alkali, sulfuric acid within 80%, and nitric acid within 50%. Made of pressed film, it has the advantages of high mechanical strength, no aging, no toxin decomposition, etc. The service life is extended by 5-6 years. It is an alternative product to stainless steel.

Installation
Place the pump on the foundation, calibrate the level, and fix it with anchor screws (you can also fix it with cement mortar without anchor screws). In order to facilitate the replacement of hydraulic oil and flushing of mud pipes, the pump
The foundation should be 100mm higher than the ground, and there should be drainage ditches around the foundation.

Technical data

Factory and certificate display

Q: Are you trading company or manufacturer ?
A: We are factory.