150mm Multi-Tier Louvered & Layered Outdoor WPC Shutter Fence
Product Summary
This specification details a first-generation premium multi-tier segmented louvred and planked fencing system engineered to simultaneously deliver absolute lower boundary security, cross-ventilation, and upper-tier light diffusion. Extruded as a dense, single-layer homogeneous composite matrix, the profile retains its signature rugged, glare-free matte texture without an artificial plastic jacket. Utilizing a functional hybrid configuration, the lower tier employs tight tongue-and-groove solid planks for a 100% privacy barrier, while the upper section transitions into fixed-angle diagonal shutters. This architecture allows ambient natural sunlight to filter down into the garden while facilitating continuous aerodynamic airflow. Serving as a high-performance boundary, it provides the ultimate functional cladding solution for luxury pool perimeters and upscale backyard patios.
About this Product
Dual-Zone Hybrid Configuration
Designed with a modular dual-zone layout, the lower section provides solid privacy for ground-level seating, while the upper shutter section allows open-air light filtering.
Anti-Vortex Aerodynamic Diffusion
The angled horizontal louvers deflect heavy incoming wind gusts upward and outward, transforming localized air turbulence into a soft, managed airflow across the backyard.
Inter-Locking Multi-Gap Flex System
Built around a universal horizontal tracking framework, contractors can stack and mix the plank segments to create fully customized private or semi-private heights on-site.
Solid Homogeneous Abrasive Armor
The single-layer profile features deep internal thermal stabilization, ensuring the complex multi-slat ridges remain uniform in tone and structurally flat without peeling or warping in cold climates.



Technical Specification
| No. | Test Item | Standard Range | Test Standard |
| 1 | Water Absorption | ≤1.0% - 2.0%(24h) | ASTM D1037 |
| 2 | Flexural Strength | ≥ 20 MPa - 30 MPa | ASTM D7032 / EN 310 |
| 3 | Flexural Modulus | ≥ 1800 MPa - 2500 MPa | ASTM D7032 |
| 4 | Impact Resistance | ≥ 10 J | EN 15534 |
| 5 | Fire Rating | Class Bfl-S1 | EN 13501-1 / ASTM E84 |
Certification

How to Install






Performance Advantages






Our Factory





FAQ
A1: No, it is specifically angled to prevent that. The horizontal shutter slats are fixed at a precise downward 45-degree angle with a calculated overlapping margin. This means that while it allows daylight from the sky to filter down into your garden, it completely blocks direct downward lines of sight from neighboring second-story windows or elevated balconies, ensuring total multi-dimensional privacy.
A2: The overlapping clearance between the shutter slats is wide enough to allow dried leaves and tree seeds to blow straight through or fall downward naturally during rainstorms. For fine regional dust or yellow pollen that rests on the horizontal 45-degree slopes, you don't need to wipe them by hand; a brief spray with a standard garden hose from the inside out will wash all trapped debris away in seconds.
A3: Our first-generation WPC contains advanced thermal stabilizers and fire-retardant mineral compounding, giving it excellent localized thermal stability. However, like all wood-plastic composites, it should not be exposed to direct open flames. We recommend keeping open-fire charcoal grills or high-power patio gas heaters at least 1 meter away from the fence surface to prevent localized heat distortion.
A4: The tongue-and-groove tracks on the lower solid panels are engineered with a specialized inverted V-shape drainage interlocking profile. When rainwater hits the vertical surface, the moisture is guided outward and flows straight down to the ground without pooling or trapping stagnant water inside the structural seams, completely eliminating the risk of internal moisture damage.