V2801SD_1GPD Epon Onu Gigabyte Reverse PoE GPON EPON Dual Modes
Product Description
V2801SD_1GPD EPON ONU is support Dual mode(EPON and GPON), It can also be applied to a wide temperature environment, and also has a powerful firewall function. It meets telecom operators FTTO (office), FTTD (Desk), FTTH(Home) broadband speed, SOHO broadband access, video surveillance and other requirements and design a GPON/EPON Gigabit Ethernet products.
V2801SD_1GPD ONU is based on the mature Gigabit GPON/EPON technology, highly reliable and easy to maintain, with guaranteed QOS for different service. And it is fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah. With the technology of PoE (Power over Ethernet) for V2801SD-1GPD, we can transfer both data and electrical power from PSE adapter to ONU using a standard CAT5 cable.
EPON GPON ONU with Reverse PoE
     
Key Features
Application
1GE+POE(PD) ONU For IP Camera

Specifications
| Technical item | 1GE | 
| PON |  			 1 G/EPON port(EPON PX20+ and GPON Class B+) Wavelength:Tx1310nm,Rx 1490nm SC/UPC connector Receiving saturation:≥-8dBm Receiving sensitivity: ≤-28dBm Transmitting optical power: 0~+4dBm Transmission distance: 20KM  |  		
| LAN | 1x 10/100/1000M Full/Half, RJ45 connector | 
| PD(Reverse POE) | DC +12 ~ +24V | 
| LED | 3, For Status of REG,SYS,LINK/ACT | 
| Operating condition |  			 Temperature: -30℃~+70℃ Humidity: 10%~90%(non-condensing)  |  		
|  			 Storing condition  |  			 			 Temperature : -30℃~+70℃ Humidity :10%~90%(non-condensing)  |  		
| Power supply | DC 12V/0.5A | 
| Power consumption | ≤4W | 
| Dimension | 82mm×82mm×25mm(L×W×H) | 
| Net weight | 85g | 
Interfaces
| Port Type | Function | 
| PON Interface | Connect PON port with single mode optical fiber cable. SC/UPC connector type | 
| LAN Interace | Support PD(reverse POE) function. | 
| RST button | Press RST button and keep 1-5s to restart the device and recover factory default settings. | 
| DC12V | DC12V power adapter connector socket | 
Indicators
| LED | Mark | Color | Status | Description | 
| system | SYS | Green | On | Device is powered on and starting. | 
| Blink | Device is running normally. | |||
| Off | Device is powered off. | |||
| Optical signal state | REG | Yellow | Blink | Device is not registered to the PON system. | 
| Green | Blink | Device is being registered. | ||
| Green | On | Device is registered to the PON system. | ||
| Interface | LINK/ACT | Green | On | Port is connected properly . | 
| Off | Port connection exception or not connected. | |||
| Blink | Port is sending or/and receiving data. |