3.84kWh 3.6kW Off Grid Energy Storage System with MPPT Solar Charging
This compact off grid energy storage system combines a 3.84kWh LiFePO4 battery, 3.6kW inverter and MPPT solar charging. It is designed for selected essential loads at small homes, cabins, remote offices and service points where daily energy use can be carefully managed.
The 3.84kWh battery is best used for a controlled group of loads rather than every appliance at the site. Lighting, routers, laptops and selected refrigeration can be prioritized according to their wattage and operating hours.
The inverter can supply up to 3.6kW continuously, but high power shortens the available operating period. Daily watt-hour consumption should therefore be calculated separately from peak load power.
The MPPT input supports a 60–500Vdc operating range, 500Vdc maximum open-circuit voltage and 18A input current. The proposed solar string must remain within these electrical limits.
When solar production is insufficient, a compatible utility or generator source can recharge the battery. The source must provide stable voltage and frequency within the inverter’s AC input range.
Two output channels allow essential equipment to be separated from flexible loads. The combined output remains 3.6kW, and motor startup demand should be checked before connection.
The system does not support grid export or parallel operation. Its role is to store energy and supply local loads from one standalone system.
| Off-Grid Energy Reserve | 3.84kWh LiFePO4 / 25.6V / 150Ah |
| Continuous AC Output | 3.6kW / 220 or 230Vac / Pure Sine Wave |
| Instantaneous Output | 5400VA |
| Solar Input Limits | 60–500Vdc MPPT / 500Vdc Maximum Voc / 18A |
| AC Recovery Input | 230Vac / 170–280Vac or 90–280Vac / Auto 50–60Hz |
| Maximum Charging Current | 100A PV, AC or Combined Charging |
| Communication | RS232 / RS485 / CAN / LCD |
| Transfer Reference | 10ms Computer Mode / 20ms Household-Appliance Mode |
| Installation Environment | IP22 / Dry Protected Area / No Grid Export |
Yes, when the solar array, stored energy and load profile are properly matched.
Operating time depends on total wattage, usage hours, conversion losses and the retained battery reserve.
A compatible generator may be used when its voltage, frequency and continuous output meet the AC input requirements.
No. Grid-connected export is not supported.
Provide appliance wattage, operating hours, motor startup power, sunlight conditions and solar-panel specifications.
Send your essential loads and daily operating hours. We will review whether the compact 3.84kWh configuration is sufficient.